27 Results
R&S®CMW100 Universal non-signalling test set incl. 5G NR at sub 6 - Fact Sheet
R&S®CMW100 Universal non-signalling test set incl. 5G NR at sub 6 - Fact Sheet Brochures and Data Sheets
R&S®CMW100 Communications Manufacturing Test Set (model K06) - Specifications
R&S CMW100 Communications Manufacturing Test Set - Specifications
R&S®CMW100 Communications Manufacturing Test Set (model K03) - Specifications
R&S CMW100 Communications Manufacturing Test Set - Specifications
Bluetooth® Low Energy Over-The-Air Advertiser Testing
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.
14-Dec-2020 | AN-No. 1C109
CMA180 / CMW100 GUI displays "Smartcard not found"
CMA180 / CMW100 GUI displays "Smartcard not found"
CMA180 / CMW100 (XRT100) Application can not be started due to "Error"
Sometimes when I start the XRT100 measurement, the CMA application returns a connection error. What can I do to avoid this problem?
CMW100 Model K02 show "No smartcards found" after Base 3.8.x firmware update
After an Base firmware update to version 3.8.x or newer a failure message "no smartcards are found" is shown during the start of the CMW program on the controller PC.
27-Feb-2023
Rohde & Schwarz collaborates with Qualcomm and Iridium Communications to test Snapdragon SatelliteQualcomm Technologies Inc., Iridium Communications Inc. and Rohde & Schwarz recently collaborated on testing and validating Snapdragon® Satellite, a solution from Qualcomm Technologies for satellite-based connectivity on next-generation Android smartphones. Manufacturers who want to offer smartphones with truly global coverage can rely on test equipment from Rohde & Schwarz to confirm the full functionality of their products: The R&S CMW100 non-signaling wireless tester is supported by the Qualcomm® Development Acceleration Resource Toolkit (QDART) to verify the Iridium® waveforms in R&D and production testing.
High-volume multi-DUT production testing presented at GSMA MWC 2016
A small form factor puts the instrument as close as possible to the test fixture, allowing for the shortest possible cable connections CMW100, multi-device communications, manufacturing test, set, multiport, frontend, parallel receiver test function, broadcasting, shortest possible cable connections Rohde & Schwarz presented the R&S®CMW100 multi-device communications manufacturing test set at the GSMA
Demystifying 5G - Ready for testing 5G NR sub-6 GHz devices in production with the R&S CMW100
The R&S®CMW100 communications manufacturing test set with a supported bandwidth of 160 MHz is ready for testing initial 5G NR sub-6 GHz wireless devices in production. The video demonstrates a typical manufacturing test case using a 5G NR-like waveform.
Characterization of Sigfox Devices from Lab to Production Line
The application note guides developers and manufactures of Sigfox Devices to perform the required and recommended measurements with test solutions from Rohde & Schwarz.
15-Nov-2017 | AN-No. 1MA294
Different options to configure external attenuation within CMWRun
How can the external attenuation values be configured and embedded in the CMWRun test sequences?
04-Jan-2024
Rohde & Schwarz leverages technology from Analog Devices to develop a wireless battery management system production test solutionAnalog Devices, Inc. (ADI) and Rohde & Schwarz are helping the automotive industry to adopt wireless battery management system (wBMS) technology which brings technical, environmental, and cost advantages compared with wired battery management systems (BMS). A new automated test solution is tailored for verification and mass production tests of wireless device tests. This development builds on existing efforts for wBMS RF robustness testing.
Detecting production failures in shielded environments presented at GSMA MWC 2016 presented at GSMA MWC 2016
The R&S®TS7124 RF shielded box together with the multiport R&S®CMW100 communication manufacturing test set leads to extremely fast non-signaling measurements.
3GPP cellular V2X testing in production presented at GSMA MWC 2019
The R&S®CMW100 communications manufacturing test set is the first and only test solution supporting all V2X technologies. MWC2019, CMW100, cellular V2X, C-V2X, SMBV100B, GSMA, Mobile World Congress Rohde & Schwarz demonstrates cellular V2X non-signaling testing at GSMA Mobile World Congress 2019 in Barcelona.
5G NR production testing for FR1 devices presented at GSMA MWC 2019
MWC2019, CMW100, RF parameter test, FR1, production test, GSMA, Mobile World Congress Rohde & Schwarz showcases 5G NR high quantity production testing for the sub 6 GHz (FR1) frequency range at GSMA MWC 2019.
02-May-2017
Rohde & Schwarz T&M equipment adopted by Renesas for R&D, conformance test and production of IEEE 802.11p devicesRohde & Schwarz T&M equipment enables semiconductor manufacturer Renesas to provide first class communications solutions for the 11p market.
R&S®CMW100 Communications Manufacturing Test Set - Product Flyer
R&S CMW100 Communications Manufacturing Test Set - Product Flyer
08-Feb-2018
MWC 2018: Rohde & Schwarz to present cutting-edge T&M equipment for 5G, LTE-A Pro, IoT and IP securityMobile World Congress 2018: Rohde & Schwarz to present cutting-edge T&M equipment for 5G, LTE-A Pro, IoT and IP security
Over the air thermal effects diagnostics on 5G NR devices presented at MWC 2019
MWC2019, CMW100, GSMA, Mobile World Congress Rohde & Schwarz presented a thermal solution for analyzing 5G mmWave chipsets and UE performance under extreme temperature conditions at GSMA Mobile World Congress 2019 in Barcelona.
Demystifying 5G – US is leading the race for 5G frequency candidates
Video, 5G, mmWave, 5G NR, manufacturing, production, non-signaling, CMW100, CMW500, 3GPP, demystifying 5G This video provides a summary on the intended frequency bands for 5G in the US and explains the potential auction principles.
Application Brochure - Bluetooth® Testing with the R&S®CMW
Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
R&S®CMW Wideband Radio Communication Tester - Platform overview - Product Brochure
R&S CMW Wideband Radio Communication Tester - Platform overview - Product Brochure
RSCommander
Versatile Software Tool for Rohde & Schwarz Instruments
RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
24-Dec-2017 | AN-No. 1MA074
Characterization of LoRa Devices
This application note shows developers and manufacturers of devices with LoRa wireless technology how transmitter measurements are conducted in line with FCC Part 15.247.
29-Nov-2017 | AN-No. 1MA295
Results 1 - 27 of 27