Download Center

R&S®ATS1800C Compact 3GPP compliant OTA chamber for 5G NR mmWave signals - Specifications Brochures and Data Sheets Specifications

R&S ATS1800C Compact 3GPP compliant OTA chamber for 5G NR mmWave signals - Product Brochure

15-Sep-2023

Rohde & Schwarz and IMST showcase OTA measurements of electrically large beamforming antenna arrays for SATCOM applications at EuMW 2023.

Discover the easy-to-use test solution for high speed multichannel acquisition for 5G NR signals from Rohde & Schwarz.

25-Feb-2020

08-Nov-2021

With the R&S ATS1800M, Rohde & Schwarz introduces an extension to the well-established R&S ATS1800C, a compact antenna test range (CATR) based 5G NR mmWave test chamber for over-the-air (OTA) testing. By adding two side chambers, the existing test chamber turns into the only single-system solution that enables full 3GPP-specified conformance testing of a 5G NR mmWave device for radio resource management (RRM), including multiple angles of arrival (AoA).

Multi CATR, OTA, RRM, 2AoA, FR2, 5G NR, ATS1800C, ATS1800M R&S® ATS1800M is a multi compact antenna test range (CATR) extension to the established R&S®ATS1800C compact shielded chamber.

Multi CATR, OTA, RRM, 2AoA, FR2, 5G NR, ATS1800C, ATS1800M R&S®ATS1800M is a multi CATR exten.sion to the well known and establishedR&S® ATS1800C compact and protable CATR solution.

ATS1800 C

ATS1800 C

Rohde & Schwarz presents the most compact CATR solution R&S®ATS1800C. The system allows to test heavier mmWave devices in a big quiet zone yet on a small chamber footprint. Rohde & Schwarz presents the most compact CATR solution R&S®ATS1800C. The system allows to test heavier mmWave devices in a big quiet zone yet on a small chamber footprint.

MWC2019, ATS1800C, 5G conformance, 5G compliance, CATR, FR2, 5G mmWave, GSMA, Mobile World Congress Rohde & Schwarz presented conformance testing for 5G NR mmWave devices at GSMA Mobile World Congress 2019 in Barcelona.

MWC2020, 5G NR, FR2, conformance test, TS8980, CATR, ATS1800C, RF performance Follow this video series on our latest T&M innvoations for 5G devices, base stations and 5G mobile networks and many more topics.

30-Aug-2023

Join Rohde & Schwarz in Berlin for EuMW 2023, Europe's premier microwave event! Discover cutting-edge test solutions focused on early sub-THz research for 6G.

13-Jun-2024

Rohde & Schwarz is advancing its pioneering sub-THz research in the D-Band and has reached important milestones. In collaboration with the Berkeley Wireless Research Center (BWRC), the test and measurement expert has successfully characterized a TX/RX multi-antenna chip (CHARM) operating at up to 140 GHz, using their D-Band over-the-air (OTA) test chamber. Academia and industry leaders agree that the 110 GHz to 170 GHz frequency range, known as D-Band, is critical for beyond 5G and 6G mobile communications and future automotive radar applications.

08-Dec-2021

As 5G networks are being rolled out globally, the evolution of the 5G NR standard continues. With Release 17, 3GPP will extend the frequency support of 5G NR mmWave bands into the unlicensed spectrum up to 71 GHz, a frequency band traditionally used by non-cellular standards like IEEE 802.11ad and 11ay. To address new testing challenges related to this bandwidth extension and to evaluate the performance of the latest generation RF transceiver chipsets, Rohde & Schwarz and Sivers Semiconductors teamed up to test RF transceivers for 5G NR up to 71 GHz.

23-May-2023

At IMS2023, Rohde & Schwarz is set to exhibit a range of live demos that showcase the cutting-edge developments within the industry. IMS attendees will also have the opportunity to participate in the interactive "Are you a genius?" RF Design challenge, putting their knowledge to the test at the Rohde & Schwarz booth.

06-Jun-2022

Rohde & Schwarz presents latest innovations for 5G and 6G component testing at IMS 2022.

25-Jan-2023

Rohde & Schwarz exhibits at the Mobile World Congress 2023 in Barcelona under the motto “Test. Measure. Innovate.” its exciting and innovative portfolio of mobile and wireless communications testing solutions.

Feedthroughs are used to run cables from the outside into a shielded environment such as an RF shielded box or an OTA chamber. This is done to maintain the shielding effectiveness of a given environment and prevent leakage of RF radiation into or out of the chamber.

radiated conformance testing according to TS 38.141-2, Rel. 16

3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141.

30-Jun-2020 | AN-No. GFM325

T&M solution guide for network infrastructure equipment providers

Test and measurement solutions for medical and health applications - Brochure

Slide left Slide right

Test and measurement solutions for medical and health applications - Brochure

Test and measurement solutions for medical and health applications - Brochure ZH-CN