Download Center

Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure

Slide left Slide right

Application Brochure - Bluetooth® Testing with the R&S®CMW

Application Brochure - Bluetooth® Testing with the R&S®CMW JA

Application Brochure - Bluetooth® Testing with the R&S®CMW KO

Application Brochure - Bluetooth® Testing with the R&S®CMW ZH-CN

Measurements on Bluetooth Devices using R&S CMU200 and CMUgo

06-Oct-2006 | AN-No. 1CM50

Unplug Bluetooth Low Energy testing reinvented - Flyer

Bluetooth(TM) Product Overview

R&S CMU Bluetooth Flyer

28-Mar-2024

Rohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.

26-Mar-2024

Rohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.

Rohde & Schwarz Operating Manual for the Bluetooth®Enhanced Data Rate and Bluetooth®5.0 application of the signal generator; option R&S®SMBV-K60, SMBV-K117

23-May-2024

Designed for test environments, the BBA300 amplifier offers up to 450 W RF saturation power at the output, at frequencies from 380 MHz to 6 GHz.

Rohde & Schwarz User Manual for the Bluetooth®EDR application of the signal generator R&S®SMM100A; options R&S®SMM-K60, R&S®SMM-K117.

Rohde & Schwarz user manual for the Bluetooth®EDR application of the R&S®SMBV100B; options R&S®SMBVB-K60, R&S®SMBVB-K117.

In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment. In this video, we make a short tour on the technology evolution of Bluetooth LE to Bluetooth 5 to address the IoT market beyond wearables, PC peripherals and audio equipment.

Rohde & Schwarz User Manual for the Bluetooth®EDR application of the signal generator R&S®SMW200A; options R&S®SMW-K60, R&S®SMW-K117.

Setting a CMW as a Bluetooth LE packet Generator

CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans.

The R&S CMW platform covers all test cases defined by Bluetooth SIG. The video demonstrates Bluetooth 5 measurements using the R&S CMW270 wireless connectivity tester.

Analyze correlations between WLAN and Bluetooth

R&S®FSV-K8 Bluetooth Measurements Operating Manual

Rohde Schwarz, R&S, Let’s talk IoT, IoT, Bluetooth LE, BLE testing, Bluetooth LE test mode, BT BER test This video explains different way of testing Bluetooth® Low Energy. The BLE test mode supports all tests in direct test mode (DTM) without the need of a control cable.

Bluetooth Reciver Intermodulaton- and Blocking Performance tests fail with every DUT when using an external signal generator to generate the interferer signals.

Video, Application video, Product video CMW500, CMW Platform, CMW270, CMW290, Bluetooth, Low Energy, Bluetooth LE measurement This video shows how to measure Bluetooth Low Energy (LE) devices with the R&S®CMW test platform

Rohde & Schwarz User Manual for R&S®FSV-K8 Bluetooth measurement application; Describes the specific functions of the application, including the remote control commands with programming examples.

Only the R&S®CMW testers allow developers to perform RF signaling tests on Bluetooth LE devices without any control cable using over-the-air measurements. This method permits detailed analysis of RF characteristics and transitions between NB-IoT Release 14 and Bluetooth.

Rohde & Schwarz user manual for the R&S®FSW-K8 Bluetooth application; provides all the information specific to the application. All general instrument functions and settings common to all applications are described in the main R&S FSW user manual.

Rohde & Schwarz user manual for the R&S®FSV3-K8 Bluetooth application; provides all the information specific to the application. All general instrument functions and settings common to all applications are described in the main R&S FSV3000 user manual.

In this video, we demonstrate a detailed analysis of a Bluetooth LE signal including modulation quality and frequency error. video, signal analyzer, FPL, VSE In this video, we demonstrate a detailed analysis of a Bluetooth LE signal including modulation quality and frequency error.

21-Feb-2024

Quectel Wireless Solutions, a global IoT solutions provider, and Rohde & Schwarz have successfully validated Quectel’s innovative 5G eCall module, part of the AG56xN series of automotive modules. For the test, the R&S CMX500 wideband radio communication tester has been used. The test setup will be shown at Mobile World Congress 2024.

Versatile Software Tool for Rohde & Schwarz Instruments

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

24-Dec-2017 | AN-No. 1MA074

IoT: Wireless interfaces in electronic designs, Bluetooth 5, Wi-Fi 6 Learn about the main challenges of these wireless IoT interfaces as well as their impact on the rest of your design and how multi-domain testing can simplify your IoT journey.

Operating manuals commonly focus on explaining a dedicated feature of a single instrument. This application note examines a range of typical user tasks and how to solve them with the different instruments.

26-Apr-2013 | AN-No. 1GP72