Download Center

Broadcast test center that offers a complete test environment for all common broadcast standards with DUT stimulus and analysis.

Reference signal generator with audio/ video analysis functions

; broadcast test center; precompliance testing; interoperability test; transmission simulation; interference testing; broadcast signal generator; 2 RF path signal generator; Test suite software; broadcasting; test and measurement; broadcast test center; preconformance testing; D-Book; NorDig; E-Book; TV broadcast standards; radio broadcast standards; video quality

XM Radio Waveforms (R&S®BTC-K256 / R&S®SFE-K256 / R&S®SFE100-K256) Manual

ATSC receivers must fulfill the ATSC Receiver Performance Guidelines before they can be sold freely in the markets that have adopted the standard.

29-Sep-2016 | AN-No. 1GP111

This application note describes the necessary settings in the user interface of the R&S® Broadcast Test Center BTC which supports the new “Next Generation Broadcast Standard ATSC 3.0” with BTC firmware version 2.20 and later.

27-Mar-2018 | AN-No. 1GP119

Functionality testing of automotive infotainment devices - Application Card

19-Feb-2018

Rohde & Schwarz makes the simulation of complex coexistence scenarios simpler than ever before, thanks to a quick and easy setup of complex interference scenarios.

18-Mar-2019

This application note covers the fundamentals of analog component signals and shows how the signal quality can be measured.

28-May-2015 | AN-No. 7MH107

R&S AVBrun Audio / Video / Broadcast Sequencer Software Tool - Application Brochure

This application note explains a compact and versatile MIMO test solution for any common broadcast standard with real time fading including the simulation of channel correlation for a 1x4 MIMO system.

11-Oct-2017 | AN-No. 1GP114

Rohde & Schwarz getting started manual for the R&S®BTC broadcast test center. Reference signal generator with audio/video analysis functions.

This application note describes the test procedures and provides save-recall files and interferer signals for the Broadcast Test Center R&S®BTC.

11-Jul-2017 | AN-No. 1GP116

BTC, broadcast test center, DTG Testing, D-Book In cooperation with Rohde & Schwarz, the Digital TV Group's Broadcasting Conformance Test Lab (DTG Testing) has successfully tested the R&S®BTC and the R&S®AVBrun D-Book test suite.

This application note describes test procedures for terrestrial broadcast sound receivers for conformance with the radio equipment directive of the EU, according to EN 303345.

29-May-2020 | AN-No. 1GP117

Find the most important facts about the R&S®BTC broadcast test center. During our live press conference, the product was presented and the market requirements were discussed. BTC, broadcast test center, BTC Online Press Conference This new all-in-one solution supports the generation and analysis of RF signals for all commonly used broadcast standards in one single instrument.

BTC for EN 303 345 compliance testing.

For A/V devices such as smartphones, tablet PCs, Blu-ray players, set-top boxes and TV sets, the perceived video quality must satisfy very high standards. A/V devices need to hold their own in three main areas: ı Stability (environmental influences, response to source signal disturbances, etc.) ı Performance (switching times, delays) ı Compliance with standards (input and output formats) Any deviations from the expected video and audio output can be automatically and precisely detected with R&S A/V distortion analysis on all common analog and digital interfaces such as HDMI™ and MHL™. This document examines the relevant setups and configurations.

15-Oct-2014 | AN-No. 7BM87

The application note address test and measurement possibilities for DVB-S2 and DVB-S2X signals in the Ku & Ka -band.

08-Mar-2016 | AN-No. 1MA273

The R&S®BTC broadcast test center from Rohde & Schwarz offers the turnkey solution in a single box.

Rohde & Schwarz user manual for the Satellite Navigation (GPS/Galileo/GLONASS/Beidou) application for R&S®WinIQSIM2; options R&S®nnn-K244/-K266/-K294/-K407

The advantages the new broadcast test center at a glance: Modular, scalable platform Maximum RF performance Complete DUT test environment with signal generator, analyzer and simulator in one instrument Automated tests that can be reproduced at any time BTC, broadcast test center, This new all-in-one solution supports the generation and analysis of RF signals for all commonly used broadcast standards

Rohde & Schwarz User Manual for the R&S®TA-TRS Sequencer Software for RF performance testing.

06-Dec-2021

The upgrade with the Rohde & Schwarz signal generator and RFSpark Auto Tester is expected to support the demand for compliance testing as Indonesia moves towards nation-wide DVB-T2 roll out.

To generate a full channel load, as necessary for DVB-C2 receiver tests for example, only two Rohde & Schwarz instruments, the R&S BTC and R&S CLG, are necessary.

30-Jul-2013 | AN-No. 7BM88

BTC

BTC

BTC

For the purposes of testing the compatibility and performance of receiver modules, this application note describes how this type of composite T2-Base/T2-Lite RF signal can be simulated using one R&S®BTC or alternatively two instruments from the family of broadcast signal generators.

03-Feb-2014 | AN-No. 7BM81

The R&S®BTC broadcast test center from Rohde & Schwarz offers the turnkey solution in a single box.