203 Results
R&S®RTP-K101: Compliance test for USB 3.2 Gen 1&2 - Fact Sheet
R&S®RTP-K101: Compliance test for USB 3.2 Gen 1&2 - Fact Sheet Brochures and Data Sheets
05-Jun-2024
Rohde & Schwarz approved by USB-IF for USB 3.2 Gen 1 & Gen 2 transmitter and receiver compliance testingThe USB-IF has approved the USB 3.2 compliance test solution from Rohde & Schwarz, confirming that it meets the stringent requirements set by the standardization body. Manufacturers of USB devices can have full confidence in the accuracy and reliability of the test results produced by the test solution.
Drivers for R&S®RTP Oscilloscope
Models: R&S®RTP044B, R&S®RTP064B, R&S®RTP084B, R&S®RTP134B, R&S®RTP164B
Firmware for R&S®RTP Oscilloscope
Models: R&S®RTP044B, R&S®RTP064B, R&S®RTP084B, R&S®RTP134B, R&S®RTP164B
Software for R&S®RTP Oscilloscope
Models: R&S®RTP044B, R&S®RTP064B, R&S®RTP084B, R&S®RTP134B, R&S®RTP164B
Realtime deembedding with the R&S®RTP
Rohde & Schwarz Realtime deembedding with the R&S®RTP
25-Sep-2018
How to use external frontends with the R&S®RTP high-performance oscilloscope - White paper
External frontends (FEs) extend the frequency range of the R&S®RTP high-performance oscilloscope. The basic functionality of an FE is similar to a spectrum analyzer. Depending on the selected radio frequency (RF), an intermediate frequency (IF) is transmitted to the oscilloscope. These frequencies are typically centered roughly at 5 GHz or 10 GHz.
R&S®RTP-B High-Performance Oscilloscope | 고성능 오실로스코프 - Product Brochure
R&S®RTP 오실로스코프는 진보된 사용자 인터페이스와 대형 스크린을 제공하는 고성능 오실로스코프입니다. 초소형 제품 크기와 우수한 성능, 사용자의 필요에 맞춰 활용 가능한 유연성을 동시에 지원합니다. R&S®RTP 오실로스코프는 실시간 신호 무결성을 분석하기 위한 최적의 솔루션입니다.
Power integrity measurements with R&S®RTP oscilloscopes
The R&S®RT-ZPR20 and R&S®RT-ZPR40 power rail probes with a 1:1 attenuation ratio have very little noise and sufficient bandwidth to not attenuate critical signal content.
17-Jul-2018
R&S®RTP-B High-Performance Oscilloscope - Product Brochure
The R&S®RTP oscilloscope has an enhanced user interface and a large screen for the outstanding performance and flexibility you expect, combined with a very small footprint. This is perfect for signal integrity analysis in real time.
Two-channel measurement of range gate pull-off jamming
Use R&S®RTP high-performance oscilloscopes and the R&S®VSE-K6A phased array measurement option for analyzing deceptive jamming techniques and automating jamer testing.
12-Jul-2021
R&S®RTP high-perfomance oscilloscope - Fact sheet
R&S®RTP high-perfomance oscilloscope - Fact sheet Brochures and Data Sheets
R&S®RTP-B High-Performance Oscilloscope - Specifications
R&S®RTP-B High-Performance Oscilloscope - Specifications Brochures and Data Sheets Specifications
The R&S®RTO/RTP in accelerator physics
The R&S®RTO/RTP is perfect for precise measurements in many accelerator physics lab applications, such as in synchrotrons or free electron lasers.
17-Dec-2013
Demodulating radar RF pulses with an oscilloscope
This document describes the use of the R&S®RTO and R&S®RTP to demodulate RF pulses for further measurements and precisely trigger on and analyze RF pulses.
13-Mar-2019
Trigger on radar RF pulses with an oscilloscope
The R&S®RTO and R&S®RTP oscilloscopes are capable of triggering precisely on a pulse as a prerequisite for time domain and frequency domain analysis.
13-Mar-2019
5G NR MIMO signal analysis
The R&S®RTP/R&S®RTO and R&S®VSE meet the need to verify 5G NR MIMO signals and the signal characteristics of beamforming quickly and coherent.
04-Mar-2020
Working with acquired waveform data in Python
How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE.
12-Jan-2022
Ground or no ground, that is the question – how to connect your probe
High-speed serial interfaces often transmit data with differential signaling and differential probes can be used to access signal traces. In addition to differential inputs, these probes have a ground connection.
02-Nov-2022
Automotive Radar - Chirp Analysis with R&S RTP Oscilloscope
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
07-Aug-2019 | AN-No. GFM318
High dynamic range current measurements on IoT devices
High dynamic range current measurements on IoT devices
01-Oct-2019
Signal integrity analysis for high speed datacom interfaces
The R&S®RTP and R&S®RTO2000 oscilloscopes are capable of characterizing high speed datacom interfaces and performing in-depth signal integrity analysis.
31-Mar-2021
Analyzing RF radar pulses with an oscilloscope
The R&S®RTO digital oscilloscope analyzes RF pulses up to the maximum bandwidth of the instrument used.
09-Nov-2017
Triggering read and write cycles of DDR3 memories
The digital trigger of the R&S®RTP combined with the zone trigger offers versatile and flexible triggering capabilities for DDR memory interface measurements.
26-Sep-2018
Comparison of jitter measurements in the time and frequency domain
It is recommended to use jitter measurement instruments for both the time and frequency domain in order to differentiate between fast and slow moving artifacts.
22-Aug-2017