31 Results
Models: R&S®ELEMI-E, R&S®ELEMI-EA, R&S®ELEMI-EAS, R&S®ELEMS-C, R&S®ELEMS-CS, R&S®ELEMS-R, R&S®ELEMS-RS, R&S®ELEMS-CRS
This document provides the technical specifications of the R&S®ELEKTRA EMC test software.
The R&S®ELEKTRA EMC test software can be used to control complete EMC test systems to perform automated or interactive electromagnetic interference (EMI) and electromagnetic susceptibility (EMS) measurements on equipment under test (EUT) to verify compliance with relevant standards.
Using R&S®ELEKTRA Migration Tool
The R&S®ELEKTRA EMC test software is the successor of the R&S®EMC32 EMC measurement software. Like the R&S®EMC32 EMC measurement software, the R&S®ELEKTRA offers a solution that controls complete EMC systems and automates measurements on equipment under test (EUT) that is being tested for emissions (EMI) and immunity (EMS) compliance. It has more features and test types compared to R&S®EMC32.As both software platforms use different file formats, R&S®EMC32 users who upgrade their existing software to the R&S®ELEKTRA platform need to perform a file conversion before migrating their data to the R&S®ELEKTRA platform. This is done by using the R&S®ELEKTRA Migration Tool, which is installed automatically with each R&S®ELEKTRA installation.This Application Note describes how to use the R&S®ELEKTRA Migration Tool (version 4.4 onwards) for converting the backup data into the XML format that can be interpreted by the R&S®ELEKTRA software. It also provides recommended conversion steps (Chapter 5) and troubleshooting tips (Chapter 6). For instructions on migrating the data using R&S®ELEKTRA Migration Tool below version 4.4, refer to the R&S®ELEKTRA user manual. For better user experience, we recommend using the latest software version for migration.This Application Note does not describe the steps to backup data using the R&S®EMC32 or R&S®ES-SCAN software. For procedures on how to do so, refer to their respective manuals.
04-May-2023 | AN-No. 1SL396
This Application Note describes how to set up the EMC test software R&S®ELEKTRA and the visual inspection softwareR&S®AdVISE for remote testing.
23-Jul-2020 | AN-No. 1S005
How to configure generic devices in R&S®ELEKTRA
Configuration of generic drivers to implement third-party devices
04-May-2023 | AN-No. 1SL398
This application note describes the use of the Rohde & Schwarz Elektra time-domain measurement system for in-depth evaluation of the RF performance of EMC/EMC application nodes with real-time requirements.
27-Jul-2022 | AN-No. 1SL384
EMC test solutions on the cutting edge - White Paper
1SL391 audio, breakthrough, ETSI EN 301 489 Audio Breakthrough Assembly and Test Setup 1SL391 audio, breakthrough, ETSI EN 301 489 Related products
11-Oct-2022 | AN-No. 1SL391
R&S®AdVISE visual inspection software automates the process of visually monitoring equipment under test (EUT) during a test sequence. This eliminates errors due to human inattention, ensures reproducible results and simplifies test documentation. A typical application is EMS testing with R&S®ELEKTRA EMC automation software.
R&S®ELEMI-E Essential EMI Test Software - Product Brochure
24-Oct-2018
Rohde & Schwarz significantly increases functionality of R&S ELEKTRA EMC test softwareRohde & Schwarz significantly increases functionality of R&S ELEKTRA EMC test software
Describes the initial installation and all functions of R&S®ELEKTRA.
Elektra Learn more about R&S®ELEKTRA EMC test solution
Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test basics. EMC compliance testing, Tools setting Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test basics.
Learn in this short video about R&S®ELEKTRA EMC test automation software how to run the test. EMC compliance testing, Run test Learn in this short video about R&S®ELEKTRA EMC test automation software how to run the test.
Learn in this short video about R&S®ELEKTRA EMC test automation software how to create a test template EMC compliance testing, Test Template Learn in this short video about R&S®ELEKTRA EMC test automation software how to create a test template
Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the test hardware. EMC compliance testing, Hardware setup Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the test hardware.
Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the devices. EMC compliance testing,Device List Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the devices..
Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test report. EMC compliance testing,Test Report Configuration Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test report.
Learn in this short video about R&S®ELEKTRA EMC test automation software how to calibrate the system path. EMC compliance testing, System path calibration Learn in this short video about R&S®ELEKTRA EMC test automation software how to calibrate the system path..
Learn in this short video about R&S®ELEKTRA EMC test automation software how to assign the attenuation table. EMC compliance testing, Attenuation Table Learn in this short video about R&S®ELEKTRA EMC test automation software how to assign the attenuation table.
Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the signal path switching. EMC compliance testing, Path switching Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the signal path switching.
Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the EUT test template. EMC compliance testing, EUT Test Template Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the EUT test template.
Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the reference calibration and the test report. EMC compliance testing, Reference Calibration Test Report Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the reference calibration and the test report.
11-Jul-2022
Rohde & Schwarz showcases its market-leading, reliable EMC test solutions at EMV in CologneAt the EMC event EMV in Cologne, Rohde & Schwarz demonstrates a comprehensive range of EMC test and measurement solutions – ranging from standalone instruments and software to application-specific systems. As a highlight, the company unveils an important enhancement to the R&S ESW EMI test receiver, the new 1GHz bandwidth extension. The Rohde & Schwarz solutions are on display from July 12 to 14, 2022 at the Cologne exhibition center, hall 10.2, booth 112.
23-Mar-2023
Rohde & Schwarz launches new EMI test receiver for emission measurements up to 30 MHz at the EMV 2023 in StuttgartThe R&S EPL1000 is a compact, complete and CISPR 16-1-1 compliant test receiver for quick and precise EMI measurements up to 30 MHz. The additional spectrum analyzer and signal and tracking generator make the R&S EPL1000 ideal for various lab applications. The new EMI test receiver will be shown at EMV 2023 Stuttgart for the first time.
05-May-2022
Rohde & Schwarz presents its latest test solutions for power electronics at PCIM Europe 2022The power electronics community will come together again at PCIM Europe in Nuremberg from May 10 to 12, 2022. Rohde & Schwarz is joining to demonstrate its latest test solutions for developers of power supplies and other power electronics. The company’s experts share their know-how about applications like stability analysis, power integrity and component testing as well as EMI debugging and EMI precompliance testing at the Rohde & Schwarz booth 452 in hall 7.
24-Nov-2022
AVL and Rohde & Schwarz collaborate to automate and speed up EMC tests under real driving conditionsElectric vehicles contain many electronic components that emit radio-frequency interference which may have a negative impact on the vehicle performance and driving experience. To ease and speed up the development process, AVL and Rohde & Schwarz, two of the world’s leading providers of automotive test systems, present an innovative solution for automated electromagnetic compatibility (EMC) data analysis of an electric drivetrain under real driving conditions.