Download Center

R&S ATS1000 Antenna Test System - Product Brochure

Rohde & Schwarz presents the R&S®ATS1000 antenna test system, a highly accurate solution for testing 5G antennas up to mmWave frequencies in a mobile shielded chamber.

17-Oct-2017

Rohde & Schwarz Instructions Handbook for the R&S®ATS1000 Antenna Test System including accessories; describing setup, alignment, connections, operation and maintenance.

R&S ATS1000 Antenna Test System - Specifications

With its small footprint, the R&S®ATS1000 antenna test system is the ideal direct far-field OTA system to test phased array antennas.

12-Mar-2020

This application note describes how to measure the antenna pattern of a mm-Wave device in the R&S®ATS1000 shielded chamber. This includes the required calibration of the measurement setup and a possible near field to far field transformation when measuring larger devices.

28-May-2018 | AN-No. 1MA304

LTE user equipment (UE) receiver performance has significant impact to cellular radio network coverage and capacity. It determines the maximum data throughput across the air interface between the LTE base station (eNB, evolved node B) and the mobile network subscriber UE, thus it determines the total capacity across the air interface. Therefore, it is one of the most important measurements to verify the actual receiver performance of individual devices, and a key metric to compare different devices, in particular.This paper shall give an introduction to receiver performance measurements and discusses the measurement metrics as well as the challenges of over the air (OTA) measurements.

31-Aug-2017 | AN-No. 1ST001

This video demonstrates the functionality of the high precision conical cut positioner in ATS1000 This video demonstrates the functionality of the high precision conical cut positioner in ATS1000 ATS1000 high precison positioner This video demonstrates the functionality of the high precision conical cut positioner in ATS1000

Rohde & Schwarz User Manual for the R&S®ATS-TEMP climate option for the R&S®ATS1000 Antenna Test System.

More: https://www.rohde-schwarz.com/wireless/B5G ThinkSix, B5G, beyond 5G, 6G, sub-terahertz, ATS1000, ZNA, D-Band This video demonstrates the R&S®ATS1000 antenna test system from Rohde & Schwarz, now supporting frequencies up to 170 GHz.

The ATS1000 simplifies the testing needs because no mechanical modification and no additional RF cabling is required to measure the amplitude and phase coherent response of an unknown DUT in the frequency range from 110 GHz to 170 GHz. 6G antenna measurements, 6G antenna radiation pattern, 6G antenna charactization in D-band, Phase coherent measurements up to 170 GHz The ATS1000 CATR based 5G NR mmWave

This video demonstrates passive antenna measurements using a Vector Network Analyzer and the AMS32 software This video demonstrates passive antenna measurements using a Vector Network Analyzer and the AMS32 software ATS1000 passive antenna measurements with VNA This video demonstrates passive antenna measurements using a Vector Network Analyzer and the AMS32 software

The scalable R&S®ATS1000 antenna test system supports 3D antenna characterization, beamforming testing as well as near-field to far-field transformation. The system even enables far-field measurements for 5G frequencies such as 28 GHz and 39 GHz in a compact setup.

17-Dec-2020

Academia and key industry players have identified the D-Band, ranging from 110 GHz to 170 GHz, as a candidate frequency band for beyond 5G and 6G mobile communications as well as for future automotive radar applications. Rohde & Schwarz continues its pioneering sub-THz research efforts with focus in this frequency range, reaching new milestones. In collaboration with IHP, Rohde & Schwarz has performed the industry’s first full 2D/3D antenna characterization of transceiver modules operating in the D-Band.

MWC2018, ATS1000, 5G OTA test, 5G RF test, antenna test, 5G RF performance, GSMA, Mobile World Congress Rohde & Schwarz demonstrated radiated power measurements of 5G NR antenna arrays at the GSMA Mobile World Congress 2018 in Barcelona.

Together with the R&S®ATS1000 shielded chamber, it offers a compact solution in a minimum footprint – perfect for lean production environments. video, AREG100A, ATS100 Rohde & Schwarz demonstrated the all-in-one test solution for the production of automotive radar sensors at European Microwave Week 2017 in Nuremberg

Integrating the R&S®ATS-TEMP climate option into an R&S®ATS1000 antenna test system makes it possible for the first time to combine testing in an RF OTA chamber and climatic chamber testing into a single setup.

The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, frequency bands and waveforms. 5G, mmWave, 5G NR, 3GPP, antenna test, conformance testing, over the air, OTA testing, thermal testing, far-field, near-field, EIRP, ATS1000, PWC200 The video discusses various solutions for over-the-air (OTA) testing for 5G NR devices and base stations based on test

The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, frequency bands and waveforms. 5G, mmWave, 5G NR, 3GPP, antenna test, conformance testing, compact antenna test range, CATR, over the air, OTA testing, far-field, near-field, massive MIMO, peak beam, directivity, EIRP, ATS1000, PWC200, WPTC This video answers common questions that arise with 5G over

Fault identification in single elements of antenna arrays is possible by scanning in near-field range and applying the near-field to far-field transformation method.

24-Mar-2020

16-Mar-2020

Rohde & Schwarz is paving the way for research in the terahertz frequency range by demonstrating multi gigabit data transmission in the D-Band at 140 GHz. The setup features the R&S FSW high-end signal and spectrum analyzer equipped with an R&S FSW-B8001 option, supporting an unparalleled 8.3 GHz internal analysis bandwidth. This new hardware option will be available soon from Rohde & Schwarz.

R&S QuickStep ATSCAL Calibration and Measurements with R&S ATS Anechoic Chambers - Product Brochure

Optimize beamforming – From bits to RF beams - Flyer

Antenna overview for Rohde & Schwarz OTA test systems - Flyer

automotive radar precision solutions applications

08-Feb-2018

Mobile World Congress 2018: Rohde & Schwarz to present cutting-edge T&M equipment for 5G, LTE-A Pro, IoT and IP security

Feedthroughs are used to run cables from the outside into a shielded environment such as an RF shielded box or an OTA chamber. This is done to maintain the shielding effectiveness of a given environment and prevent leakage of RF radiation into or out of the chamber.

Comprehensive test solutions guide for production and R&D

Small cell is a compact base station with smaller form factor and lower transmission power in comparison to the conventional macro base station. It covers relatively small area and serves less users. Usually, small cell can be integrated into the existing mobile network. By the evolution of radio access technology, the role of small cell has been changing through the evolution path. In the 2G/3G time, its role was to provide coverage in corner cases. Later during LTE, networks are not just providing coverage but capacity too. Small cells were then used to provide the addition capacity where required without adding additional spectrum. Now in 5G era, network operators use densification as an important strategy to provide seamless 5G services which demand coverage, capacity and performance too. With use cases requiring the 5G millimeter wave (mmW) rollouts, it makes sense to use small cells for densification due to the propagation characteristics of mmW.In this application note, we will shed light on the testing aspects of a small cell throughout the product life cycle with particular focus on the production test solution for the small cell device under test (DUT) in FR2 (frequency range 2, mmW frequency band) in Over the Air (OTA) environment for option 6 split based on radio communication tester R&S®CMP200 and OTA chamber R&S®CMQ200. The document is complemented with more insights into test solutions used in typical R&D test applications towards the second half of the application note.

19-Jun-2023 | AN-No. 1SL395