Download Center

The validated UWB PHY test suite for the R&S®CMP200 radio communication tester simplifies FiRa™ Consortium PHY conformance testing.

21-Jun-2022

The R&S®CMP200 radio communication tester together with the R&S®CM-Z300A time of flight kit provides an accurate setup for time of flight measurements – in validation, calibration and certification.

27-Jul-2022

This application note describes how to use the UWB measurement functionality provided by R&S®CMP200 radio communication tester to perform HRP UWB PHY measurements for R&D and production purposes.

19-May-2021 | AN-No. GFM362

28-Feb-2024

Rohde & Schwarz and Samsung have collaborated to verify secure ranging test cases for the ultra-wideband (UWB) PHY layer and assess the secure receiver characteristics of devices based on FiRa specifications. There are new test cases specified in the FiRa 2.0 Technical Specifications, which covers the prevention of physical layer attacks on secure ranging applications based on UWB technology. These test cases were verified with the R&S CMP200 radio communication tester from Rohde & Schwarz on Samsung’s latest UWB chipset.

Discover the easy-to-use test solution for high speed multichannel acquisition for 5G NR signals from Rohde & Schwarz.

25-Feb-2020

CMP200, 5G FR2, UWB, R&D, Production, The R&S CMP200 radio communication tester is the only instrument world wide which is suited for 5G FR2 and Ultra Wide Band testing in R&D and Production.

10-Jan-2022

Rohde & Schwarz has upgraded the R&S CMP200 radio communication tester with a new option for small cell testing. Qualcomm Technologies has validated the solution, and it is now supported by the Qualcomm® Development Acceleration Resource Toolkit (QDART) for Small Cells. Manufacturers of small cell infrastructure who integrate the Qualcomm® FSM100 5G RAN Platform in their products can expect that the R&S CMP200 fulfils all necessary hardware development and production test requirements.

CMP200

Precise UWB measurement over-the-air Watch our video and discover how an OTA test setup featuring the R&S®CMP200 allows performing all cases important for UWB testing: time of flight, angle of arrival as well as transmitter and receiver performance. Our well-established R&S®CMP200 radio communication tester is now even better - with added UWB testing functionality.

17-Feb-2022

The Bosch Group has selected the R&S CMP200 radio communication tester from Rohde & Schwarz to validate automotive Ultra-Wideband (UWB) applications in manufacturing. The project is a continuation of the long-term cooperation between Bosch and Rohde & Schwarz in wireless connectivity.

R&S®CMP200, FR2 Small Cell devices, Qualcomms QSPR, R&S®VSE, R&S®WMT, test procedure This video showcases a test procedure with the R&S tool R&S®WMT.

UWB, Ultra-Wideband, development testing, NXP, automotive chipset This video shows a practical demonstration of how to measure UWB automotive IC using an R&S®CMP200 and the R&S®ATS800R.

19-Feb-2020

Rohde & Schwarz and Decawave demonstrate test functions for the new generation of Decawave UWB devices with the new generation of Rohde & Schwarz radio communication tester, the R&S CMP200. With this solution, both companies address manufacturers planning wireless devices using Ultra Wideband (UWB) technology to provide secure location-based services.

27-Jun-2022

With a new ultra-wideband (UWB) PHY Test Suite for the R&S CMP200 radio communication tester, Rohde & Schwarz now offers a PHY Conformance Test Tool (PCTT) to support conformance testing of the UWB PHY layer as specified by the FiRa Consortium.

Mobile World Congress, CMP200, ATS800R, UWB testing Video: UWB R&D, FiRa certifictaion and production testing

06-Jun-2023

At Automotive Testing Expo Europe 2023 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of cutting-edge test solutions that support automotive applications. With test solutions on show that cover automotive radar, Ethernet, 5G and UWB, the company enables the automotive industry to make the next level of autonomous driving reality.

CMP200, Automotive Ultra wideband performance testing over the air for R&D

MWC2019, CMP200, CMQ200, NRPM, OTA test, FR2, RF parameter test, GSMA, Mobile World Congress Rohde & Schwarz presents a compact OTA test solution for 5G FR2 devices at GSMA Mobile World Congress 2019 in Barcelona.

CMP200, Automotive Ultra wideband performance testing over the air for R&D

Comprehensive test solutions guide for production and R&D

Small cell is a compact base station with smaller form factor and lower transmission power in comparison to the conventional macro base station. It covers relatively small area and serves less users. Usually, small cell can be integrated into the existing mobile network. By the evolution of radio access technology, the role of small cell has been changing through the evolution path. In the 2G/3G time, its role was to provide coverage in corner cases. Later during LTE, networks are not just providing coverage but capacity too. Small cells were then used to provide the addition capacity where required without adding additional spectrum. Now in 5G era, network operators use densification as an important strategy to provide seamless 5G services which demand coverage, capacity and performance too. With use cases requiring the 5G millimeter wave (mmW) rollouts, it makes sense to use small cells for densification due to the propagation characteristics of mmW.In this application note, we will shed light on the testing aspects of a small cell throughout the product life cycle with particular focus on the production test solution for the small cell device under test (DUT) in FR2 (frequency range 2, mmW frequency band) in Over the Air (OTA) environment for option 6 split based on radio communication tester R&S®CMP200 and OTA chamber R&S®CMQ200. The document is complemented with more insights into test solutions used in typical R&D test applications towards the second half of the application note.

19-Jun-2023 | AN-No. 1SL395

25-Jan-2024

Rohde & Schwarz will showcase at MWC Barcelona 2024 under the motto “Enabling Connections, Empowering Innovations” a wide-ranging portfolio that helps industry leaders, manufacturers and visionaries turn their ideas for new mobile products, applications and technologies into reality.

R&S CMPQ Compact Solution for 5G mmWave RF Testing - Product Brochure

Slide left Slide right

R&S®CMPQ Compact Solution for 5G mmWave RF Testing - Product Brochure

R&S®CMPQ Compact Solution for 5G mmWave RF Testing - Product Brochure JA

22-Dec-2022

CES 2023: Rohde & Schwarz showcases the latest in Automotive Radar and Ultra-Wideband testing

07-Nov-2023

Innovation and production – hand in hand. The Rohde & Schwarz motto for this year’s productronica, where the company will present itself as a reliable partner for electronics manufacturing needs. Visit us at booth A1/375.

09-Nov-2021

Rohde & Schwarz has joined the Car Connectivity Consortium (CCC) to support the organization's mission to foster industrywide standards for communications between vehicles and smartphones. The company will contribute its broad expertise in mobile device and automotive technology testing. In particular, the company will provide its solutions for the development and production of UWB devices and modules for automotive applications such as keyless vehicle access.

31-May-2021

Ultra-wideband (UWB) technology relies on the ability of devices to determine their location based on distance, moving direction and relative position to other devices. To meet the UWB ecosystem’s testing needs, Rohde & Schwarz and Colby Instruments have collaborated to offer a concerted test solution that accurately simulates the moving direction of UWB devices.

UBW – Ultra Wideband 802.15.4a / 15.4z test solution with new R&S®CMP200 radio communication tester as standardized by IEEE 802.15.4 (groups a/f/z), enables very low power communication and very accurate ranging in the license-exempt spectrum.

Watch the video to see how the R&S®CMPQ test-setup, consisting of the R&S®CMP200 radio communication tester, the R&S®CMPHEAD30 remote radio head and the R&S®CMQ200 shielding cube, works. CMPQ, 5G, mmWave, RF test solution Watch the video and discover our innovative one-platform-strategy for 5G mmWave RF testing

26-Mar-2024

Rohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.

03-Mar-2021

By joining the FiRaTM Consortium, Rohde & Schwarz contributes to the organization’s efforts to establish a certification program for UWB devices. Rohde & Schwarz brings along a broad expertise in mobile device testing and certification.