52 Results
Bluetooth® Low Energy channel sounding validation
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
Bluetooth® Low Energy Over-The-Air Advertiser Testing
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.
14-Dec-2020 | AN-No. 1C109
How to configure a external trigger at CMW500, CMW290, CMW270 to synchronize with LTE signal time frames
How to configure a external trigger at CMW500, CMW290, CMW270 to synchronize with LTE signal time frames
CWMrun: Shut down AC power of CMW after CMWrun script has finished
If a CMWrun test plan script has been fished the AC power of a CMW500 / CMW290 / CMW270 should be shut down automaticly.
How to perform Bluetooth 5 testing with the R&S®CMW test platform
The video demonstrates Bluetooth 5 measurements using the R&S CMW270 wireless connectivity tester.
WLAN 802.11ax AP and station testing under realistic operation conditions
The tried and tested R&S®CMW270 Wireless Connectivity Tester can be used to test the RF characteristics of receivers and transmitters, and to determine the data throughput in the transmit and receive directions. The R&S®CMW270 is the reference system for testing IEEE 802.11ax devices under realistic operation conditions.
First one box solutions for WLAN 802.11ax MIMO signaling test presented at GSMA MWC 2019
Using the well-established R&S CMW270, developers can test the RF characteristics of both transmitters and receivers and also determine the data throughput in both directions.
Debugging CMWrun Test Plan Hints
During a CMWrun test my DUT fails on delivering isolated measurements using CMW270/290/500.
Setting a CMW as a Bluetooth LE packet Generator
Setting a CMW as a Bluetooth LE packet Generator
CMW500/290/270: No more WLAN signaling function after WLAN firmware update
CMW500/290/270: No more WLAN signaling function after WLAN firmware update
CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans
CMWrun Settings for external Interfer usage in Bluetooth LE Test Plans.
Remote Access to CMW via WiFi / WLAN
How can a WiFi connection instead be made to a WiFi network for remote access of the CMW?
Resource conflict when using RFxCOM and RFxOUT of CMW500/2xx RF-frontend in parallel
The CMW500/2xx shows a resource conflict in this situation when using in parallel the RFxCOM port and the RFxOUT port of the same RF-frontend.
Assisting Tools for Operation of Windows-Based T&M Instruments
Assisting Tools for Operation of Windows-Based T&M Instruments
13-Jun-2013 | AN-No. 1MA218
Remote Operation of Windows Based T&M Instruments with Apple iPad
This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Apple iPad as if working on it locally.
28-Mar-2013 | AN-No. 1MA216
How to measure Bluetooth Low Energy (LE) devices with the R&S®CMW test platform
Video, Application video, Product video CMW500, CMW Platform, CMW270, CMW290, Bluetooth, Low Energy, Bluetooth LE measurement This video shows how to measure Bluetooth Low Energy (LE) devices with the R&S®CMW test platform
First WLAN IEEE 802.11ax signaling test solution presented at GSMA MWC 2018
The well-established R&S®CMW270 wireless connectivity tester with a bandwidth of 160 MHz emulates an IEEE 802.11ax access point to test the RF properties and performance of a WLAN station (STA) under realistic conditions – from development to production.
26-Mar-2024
embedded world 2024: Rohde & Schwarz presents its cutting-edge test solutions for embedded systemsRohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.
Webinar: Three good reasons to rethink your Wi-Fi 802.11ax test strategy
Attendees will learn about: Technical details on the sixth generation of Wi-Fi – IEEE 802.11ax New test and measurement challenges Smart solutions for efficient and accurate testing Webinar, WLAN/Wi-Fi, Mobile device testing, IoT, CMW270 The webinar provides a glimpse into the upcoming Wi-Fi 6 standard, explains related test requirements and demonstrates the value of a novel approach to testing in
Analog and digital audio measurements with the R&S®CMW
Analog and digital audio measurements with the R&S CMW.
20-Jun-2013
Introduction to Attribute Based Instrument Drivers
Introduction to Attribute Based Instrument Drivers
01-Dec-2012 | AN-No. 1MA170
Application Brochure - IEEE 802.11 Wireless LAN Testing with the R&S®CMW
IEEE 802.11 Wireless LAN Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
Remote Operation of Windows Based T&M Instruments with Android Tablets
This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Android™ tablet as if working on it locally.
22-Aug-2013 | AN-No. 1MA236
Application Brochure - Bluetooth® Testing with the R&S®CMW
Bluetooth Testing with the R&S CMW Wideband Radio Communication Tester - Application Brochure
WLAN 802.11n: From SISO to MIMO
This application note discusses WLAN standard IEEE 802.11n. It first describes the most important amendments to previous releases and the ambitious new measurement tasks.
26-Apr-2013 | AN-No. 1MA179
Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting
Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting
20-Dec-2012 | AN-No. 1MA035
08-Feb-2018
MWC 2018: Rohde & Schwarz to present cutting-edge T&M equipment for 5G, LTE-A Pro, IoT and IP securityMobile World Congress 2018: Rohde & Schwarz to present cutting-edge T&M equipment for 5G, LTE-A Pro, IoT and IP security