Project Management : Implementation Engineer

Your tasks

• 1) To carry out system implementation, integration & verification which includes:
• Understanding customer needs or specific tender requirements before implementation.
• Investigate alternatives and evaluate based on performance, cost and risk.
• Model the system by clarifying requirements, reveals bottlenecks and fragmented activities, reduces cost and exposes duplication of efforts.
• Integrate by designing interfaces and bringing system elements together so they work as a whole. This requires extensive communication and coordination.
• Defining accurate interface requirements between systems and sub-systems either internally or externally.
• Understanding systems interface documents which allow systems interfacing to be carried out successfully.
• Launch the system by running the system and producing outputs i.e., making the system do what it was intended to do.
• Assess performance by using evaluation criteria & technical performance measures for improvement.
• Continual and iterative process of re-evaluation with many parallel loops. 2) To work closely with the Project Manager (PM) or designated Project Team Leader (PTL) on project implementation planning and execution including the provision of requirements in terms of materials to the PM or PTL in fulfilling project deliverables. 3) To work closely with Systems Design and Engineering within the department in determining systems requirements based on proposed systems design. 4) To provide schematic & equipment inter/intra connection drawings, interface, cabling reference using Visio, Autocad, EPLAN, Excel or equivalent software as deemed required for the project. 5) To define & register the quality techniques and standards to be applied, and the various responsibilities for achieving the required quality levels during the system engineering. 6) To provide the finalized System Integration solution of the R&S equipment and 3rd party equipment inclusive of block diagram, wiring diagram and software configuration prior to implementation at site. 7) To support the provision of Antenna System Design; proposed height, isolation between antennas, cable and connector type to be used. 8) To support in the identification for the purchase of third-party products required e.g. cable, Connectors, peripheral etc 9) To verify & validate the work carry out by Project Team member is accordance to the agreed System Design & Engineering 10) To recommend to PM/PTL on FAT, HAT, SAT protocol and checklist 11) To carry out Acceptance Tests with Project Team and customer. 12) To support RSMY in carrying training on systems implementation matters, operator and maintenance training courses....

Your qualifications

• 1) Candidate must possess at least a Degree in Electrical & Electronics Engineering majoring in Communication or Broadcasting or equivalent 2) Minimum of 5 years’ experience in system design, configuration & integration of radio communication / broadcasting technologies or equivalent 3) Minimum of 5 years’ experience in Project Implementation especially Defense, Air Traffic, Security, Broadcasts projects and other large projects with multi-systems interface

Interested?