58 Results
R&S®RTO2000 Oscilloscope - Product Brochure
R&S®RTO oscilloscopes combine excellent signal fidelity, up to 16-bit vertical resolution and high acquisition rate in a compact device format in the 600 MHz to 6 GHz class. They offer a fully integrated multi-domain test solution with frequency, protocol and logic analysis functions. The brilliant touchscreen makes the oscilloscopes very comfortable to use.
R&S®RTO2000 Turn your signals into success - Fact Sheet
R&S®RTO2000 Turn your signals into success - Fact Sheet Brochures and Data Sheets
R&S®RTO2000 oscilloscope - Flyer
Sales – Easy triggering and decoding in one software option bundle.
R&S®RTO2000 Oscilloscope - Specifications
R&S®RTO2000 Oscilloscope - Specifications Brochures and Data Sheets Specifications
Engineered for multidomain challenges. Discover the R&S®RTO2000 oscilloscope (600 MHz to 6 GHz) - Poster
Engineered for multidomain challenges. Discover the R&S®RTO2000 oscilloscope (600 MHz to 6 GHz) - Poster Brochures and Data Sheets Poster
R&S®RT-Zxx High Voltage and Current Probes - Specifications
R&S®RT-Zxx High Voltage and Current Probes - Specifications Brochures and Data Sheets Specifications
RTE/RTO/RTP - Wrong amplitude when digital filter is used
RTE/RTO/RTP - Wrong amplitude when digital filter is used RTE, RTO, RTP, amplitude, digital, signal, scale, waveform, vertical, frequency A sinus signal with i.e. 10 V peak-peak, frequency 1 MHz is applied. If I choose a vertical scale which is too small the peaks of the waveform are not displayed as they are out of range. Now I activate the digital filter in the “Vertical” menu à “Channel”. The frequency
RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode?
RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode? RTE, RTO, RTP, ultra segmentation, blind time I am using the ultra segmentation mode to minimize the blind time. But this is not indicated. Is there a way to calculate it? RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode? RTE, RTO, RTP, ultra segmentation, blind time I am using the ultra segmentation
RTO/RTP - Zoom Windows does not show waveform data
RTO/RTP - Zoom Windows does not show waveform data RTO, RTO6, RTP, Zoom window The Zoom function does not show any waveform data at specific settings, especially at slower timebases in combination with higher sample rates, High resolution and roll mode with more channels. The problem is gone if a lower sample rate is chosen. RTO/RTP - Zoom Windows does not show waveform data RTO, RTO6, RTP, Zoom window
RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands
RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands RTE, RTO, RTP, measurement, designated frequency, FFT, remote commands RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands. RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands RTE, RTO, RTP, measurement, designated frequency, FFT
Export of analog and digital channels of the same acquistion
Export of analog and digital channels of the same acquistion FAQ, RTE, RTO Export of analog and digital channels of the same acquistion Export of analog and digital channels of the same acquistion FAQ, RTE, RTO Export of analog and digital channels of the same acquistion Related Products
RTE/RTO/RTP - export of the history into one file with remote commands
RTE/RTO/RTP - export of the history into one file with remote commands RTE, RTO, RTP, history, export into one file RTE/RTO/RTP - export of the history into one file with remote commands RTE/RTO/RTP - export of the history into one file with remote commands RTE, RTO, RTP, history, export into one file RTE/RTO/RTP - export of the history into one file with remote commands Related Products
RTO / RTP Firmware Update from an older Version
RTO / RTP Firmware Update from an older Version RTO, RTP, Firmware update RTO / RTP Firmware Update from an older Version RTO / RTP Firmware Update from an older Version RTO, RTP, Firmware update RTO / RTP Firmware Update from an older Version Related Products
RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5
RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5 RTO, RTP, Reference Level definition RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5 RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5 RTO, RTP, Reference Level definition RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5 Related Products
RTE/RTO/RTP - Loading a settings file with Labview drivers
RTE/RTO/RTP - Loading a settings file with Labview drivers FAQ, RTE,RTO,RTP, Loading a settings file with Labview drivers RTE/RTO/RTP - Loading a settings file with Labview drivers RTE/RTO/RTP - Loading a settings file with Labview drivers FAQ, RTE,RTO,RTP, Loading a settings file with Labview drivers RTE/RTO/RTP - Loading a settings file with Labview drivers Related Products
RTO-K11 IQ Software Interface shows "CF+BW/2 > DevBW"
RTO-K11 IQ Software Interface shows "CF+BW/2 > DevBW" RTO-K11, IQ Software Interface, CF+BW/2, DevBW When yout set the carrier frequency and the filter bandwidth, you get the warning "CF + BW/2 > DevBW". RTO-K11 IQ Software Interface shows "CF+BW/2 > DevBW" RTO-K11, IQ Software Interface, CF+BW/2, DevBW When yout set the carrier frequency and the filter bandwidth, you get the warning "CF + BW/2 > DevBW
Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test?
Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite
Change the input impedance with SCPI commands
Change the input impedance with SCPI commands Input impedance, 50 Ohm, 1 MOhm, SCPI command How can I switch between the input impedance of 50 Ohm and 1 MOhm by using SCPI command. Change the input impedance with SCPI commands Input impedance, 50 Ohm, 1 MOhm, SCPI command How can I switch between the input impedance of 50 Ohm and 1 MOhm by using SCPI command. Related Products
Accuracy of RMS Measurements
Accuracy of RMS Measurements FAQ, RTO, RTE, Accuracy of RMS Measurements Accuracy of RMS Measurements Accuracy of RMS Measurements FAQ, RTO, RTE, Accuracy of RMS Measurements Accuracy of RMS Measurements Related Products
Number of harmonics in RTE/RTO Power option
Number of harmonics in RTE/RTO Power option Number of harmonics in RTE/RTO Power option Number of harmonics, RTE, RTO, Power option, FAQ Number of harmonics in RTE/RTO Power option Number of harmonics in RTE/RTO Power option Number of harmonics, RTE, RTO, Power option, FAQ Related Products
R&S Scope Suite - Error communicating with oscilloscope
R&S Scope Suite - Error communicating with oscilloscope Scope Suite, RTO2000, Error, communicating with oscilloscope R&S Scope Suite - Error communicating with oscilloscope R&S Scope Suite - Error communicating with oscilloscope Scope Suite, RTO2000, Error, communicating with oscilloscope R&S Scope Suite - Error communicating with oscilloscope Related Products
Programming examples for oscilloscopes
Programming examples for oscilloscopes Programming examples, oscilloscopes, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO, RTO1000, RTO2000, RTO6, RTP Programming examples for oscilloscopes. Programming examples for oscilloscopes Programming examples, oscilloscopes, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO, RTO1000, RTO2000, RTO6
Leackage breaker trips when probe is connected to main line
Leackage breaker trips when probe is connected to main line RTC, RTB, RTM, RTA, RTE, RTO, Leakage breaker We want to measure the voltage of the main line with our oscilloscope. Leackage breaker trips when probe is connected to main line RTC, RTB, RTM, RTA, RTE, RTO, Leakage breaker We want to measure the voltage of the main line with our oscilloscope. Related Products
RTO/RTP-K11 I/Q software interface - sample script for configuration and data query
RTO/RTP-K11 I/Q software interface - sample script for configuration and data query RTO, RTP-K11, I/Q software interface, sample script, configuration, data query The SCPI sequence for configuration and data query for the I/Q software interface option K11. RTO/RTP-K11 I/Q software interface - sample script for configuration and data query RTO, RTP-K11, I/Q software interface, sample script, configuration
RTO/RTP further calculation of a measurement
RTO/RTP further calculation of a measurement RTO, RTP, math, operations, measurement, frequency, cycles Is it possible to do math operations on a measurement? For example measure the frequency but display the result as cycles per minute? RTO/RTP further calculation of a measurement RTO, RTP, math, operations, measurement, frequency, cycles Is it possible to do math operations on a measurement? For
WEB control is not working with the RTO
WEB control is not working with the RTO RTO, WEB control, network WEB control is not working with the RTO. WEB control is not working with the RTO RTO, WEB control, network WEB control is not working with the RTO. Related Products
RTO - Export of waveform data into MATLAB
RTO - Export of waveform data into MATLAB RTO1000, RTO1002, RTO1004, RTO1012, RTO1014, RTO1022, RTO1024, RTO1044, RTO2000, RTO2002, RTO2012, RTO2022, RTO2032, RTO2004, RTO2014, RTO2024, RTO2034, RTO2044, RTO2064 I want to export the waveform data of my RTO scope into MATLAB, but the only way I found so far is the screenshot option. Is there another way to use the trace data in my script? RTO - Export
Connection of DUT and Link partner with test fixture RT-ZF2
Connection of DUT and Link partner with test fixture RT-ZF2 RTO, RTP, RT-ZF2 Connection of DUT and Link partner with test fixture RT-ZF2 Connection of DUT and Link partner with test fixture RT-ZF2 RTO, RTP, RT-ZF2 Connection of DUT and Link partner with test fixture RT-ZF2 Related Products
Volume Adjustment of the "BEEP"
Volume Adjustment of the "BEEP" FAQ, RTO, RTE, RTP Volume Adjustment of the "BEEP" Volume Adjustment of the "BEEP" FAQ, RTO, RTE, RTP Volume Adjustment of the "BEEP" Related Products
Decoding of SENT protocoll shows CRC errors
Decoding of SENT protocoll shows CRC errors Decoding, SENT protocoll, CRC errors, RTO, RTE, RTP FAQ - Decoding of SENT protocoll shows CRC errors Decoding of SENT protocoll shows CRC errors Decoding, SENT protocoll, CRC errors, RTO, RTE, RTP FAQ - Decoding of SENT protocoll shows CRC errors Related Products
RTE/RTO/RTP - Zoom shows ringing effects
RTE/RTO/RTP - Zoom shows ringing effects RTE, RTO, RTP, Zoom When I use the zoom function to look at the rising edge of a rectangle signal, I see ringing which is not real, see screenshot. What is the reason? RTE/RTO/RTP - Zoom shows ringing effects RTE, RTO, RTP, Zoom When I use the zoom function to look at the rising edge of a rectangle signal, I see ringing which is not real, see screenshot. What
RTE/RTO/RTP Autologon recovery
RTE/RTO/RTP Autologon recovery RTE, RTO, RTP, Autologon At startup of RTE/RTO/RTP Windows asks for user and password. How can I get back the autologon function? RTE/RTO/RTP Autologon recovery RTE, RTO, RTP, Autologon At startup of RTE/RTO/RTP Windows asks for user and password. How can I get back the autologon function? Related Products
Connection of R&S ScopeSuite to RTO/RTP fails
Connection of R&S ScopeSuite to RTO/RTP fails FAQ, RTO, RTE, Scope suite Connection of R&S ScopeSuite to RTO/RTP fails Connection of R&S ScopeSuite to RTO/RTP fails FAQ, RTO, RTE, Scope suite Connection of R&S ScopeSuite to RTO/RTP fails Related Products
Waveform export to csv files shows wrong values in Excel
Waveform export to csv files shows wrong values in Excel RTO, RTE, RTP, RTM, RTB, RTC, RTA I have exported the waveform into a csv file. When I open the file in Excel, the values are completely wrong. How can I get correct values? Waveform export to csv files shows wrong values in Excel RTO, RTE, RTP, RTM, RTB, RTC, RTA I have exported the waveform into a csv file. When I open the file in Excel, the
R&S Scope Suite - eMMC compliance test fails
R&S Scope Suite - eMMC compliance test fails Scope Suite, eMMC compliance test fails, RTO, RTP R&S Scope Suite - eMMC compliance test fails R&S Scope Suite - eMMC compliance test fails Scope Suite, eMMC compliance test fails, RTO, RTP R&S Scope Suite - eMMC compliance test fails Related Products
Scaling of frequency measurements RTE, RTO, RTP in cycles/min
Scaling of frequency measurements RTE, RTO, RTP in cycles/min FAQ, RTO, RTE, RTP, Scaling of frequency measurements Scaling of frequency measurements RTE, RTO, RTP in cycles/min Scaling of frequency measurements RTE, RTO, RTP in cycles/min FAQ, RTO, RTE, RTP, Scaling of frequency measurements Scaling of frequency measurements RTE, RTO, RTP in cycles/min Related Products
RTO2000 / RTP - Touch function is lost with external Monitor
RTO2000 / RTP - Touch function is lost with external Monitor RTO2000 / RTP - Touch function is lost with external Monitor When an additional monitor is connected via the HDMI interface, the touch functionality is lost. How can I get the touch functionality back? RTO2000 / RTP - Touch function is lost with external Monitor RTO2000 / RTP - Touch function is lost with external Monitor When an additional
RT-ZSxx – more noise with active probes?
RT-ZSxx – more noise with active probes? Probes, reduce noise, RTM, RTA, RTE, RTO, RTP, RT-ZSxx I have compared passive and active probes. It seems that the noise with active probes is higher. What is the reason and what can I do to reduce the noise? RT-ZSxx – more noise with active probes? Probes, reduce noise, RTM, RTA, RTE, RTO, RTP, RT-ZSxx I have compared passive and active probes. It seems that
Scope Suite Software: Can Ethernet compliance tests be done also with VNAs not from R&S
Scope Suite Software: Can Ethernet compliance tests be done also with VNAs not from R&S RTO, RTP, Scope Suite Software For some tests a vector network analyzer is required. The Scope Suite software just supports VNAs from R&S to be connected via LAN for automated measurements. Can I use also other VNAs and do the measurement manually? Scope Suite Software: Can Ethernet compliance tests be done also
Offset changes RMS measurement
Offset changes RMS measurement Offset, changes RMS, measurement, RTE, RTO, RTP When I do RMS measurements and an offset is applied, the result changes. I could not see that effect on other scopes. What is wrong here? Offset changes RMS measurement Offset, changes RMS, measurement, RTE, RTO, RTP When I do RMS measurements and an offset is applied, the result changes. I could not see that effect on other
Dongle necessary for FS-K96?
Dongle necessary for FS-K96? FS-K96, FS-K96PC, FSQ, FSG, FSUP, FSV, FSVR, RTO Is an FSPC license dongle (1310.0002.03) always needed to run the FS-K96 software? Dongle necessary for FS-K96? FS-K96, FS-K96PC, FSQ, FSG, FSUP, FSV, FSVR, RTO Is an FSPC license dongle (1310.0002.03) always needed to run the FS-K96 software? Related Products
Test and measurement solutions for medical and health applications - Brochure
The healthcare sector has adopted many existing and emerging technologies for a wide range of applications. Performance degradation or failure of medical devices and test systems can have severe consequences. As a leader in test and measurement, Rohde & Schwarz partners closely with our customers at every stage of development and deployment. We can help define your testing needs and bring your products to market as quickly as possible – with the required quality and performance. We offer solutions that cover all your medical and health application requirements. Our comprehensive product portfolio has the right test and measurement solutions for your application and budget.
R&S®5G Mobile Network Infrastructure Testing - Brochure
T&M solution guide for network infrastructure equipment providers
Oscilloscope innovation. Measurement confidence. - Poster
Oscilloscope innovation. Measurement confidence. - Poster Brochures and Data Sheets Poster
R&S®RT-Zxx Standard Probes - Specifications
Standard probes for R&S®RTC1000, R&S®RTB2000, R&S®RTM3000, R&S®MXO 4, R&S®RTE, R&S®RTO, R&S®RTP, R&S®RTH oscilloscopes
R&S®RT-ZM Modular Probe System - Flyer
Addressing high-speed probing challenges with the R&S®RT-ZM modular probe system
Probes and accessories for Rohde & Schwarz oscilloscopes - Product Brochure
Test applications for oscilloscopes range from debugging complex electronic circuits to measuring the signal integrity of high-speed bus signals and characterizing power electronics with dangerous voltage levels. Measurement accuracy and operator safety depend on the probes and accessories that are used.
Enhancing safety via testing and development of eVTOL power electronics - Case Study
In pursuit of developing standardized testing methodology in electronics development, the HORYZN team at the Technical University of Munich integrated the R&S®RTO (with the R&S®RT-ZPR20 power rail probe) from Rohde & Schwarz into their prototyping design-loop and workflow.
Signal model based approach to joint jitter and noise decomposition - First published at DesignCon 2020 - White Paper
We propose a joint jitter and noise analysis framework for serial PAM transmission based on a parametric signal model. Our approach has several benefits over state-of-the-art methods. First, we provide additional measurements. Second, we require shorter signal lengths for the same accuracy. Finally, our method does not rely on specific symbol sequences. In this paper, we show example measurement results as well as comparisons with state-of-the-art methods.
5G NR Measurement Application VSE-K144 / -K146 / -K148 / -K171 / -K175 / FSx-K144 / -K145 / -K147 / -K148 / -K171 / -K175 / FPS-K144 / -K148 - Specifications
This document provides the technical specifications of the VSE-K144 / -K146 / -K148 / -K171 / -K175 / FSx-K144 / -K145 / -K147 / -K148 / -K171 / -K175 / FPS-K144 / -K148 5G NR measurement application
Efficient analysis of power and signal integrity and EMC - Flyer
❙ Electronic design
❙ Test and measurement solutions
R&S®VSE-K106/FSx-K106/FPS-K106 EUTRA/LTE NB-IoT Measurement Application - Specifications
This document provides the technical specifications of the R&S®VSE-K106/FSx-K106/FPS-K106 EUTRA/LTE NB-IoT measurement application.
TC8 – OPEN Alliance - Flyer
Automotive Ethernet ECU Test Specifications Test Tool Package for Layer 1 to 7
R&S®RT-ZFxx Oscilloscope Test Fixtures - Specifications
Test fixture sets made by Rohde & Schwarz
The different interface standards define the connection between the measuring equipment and the device under test. Rohde & Schwarz offers the required test fixture sets.