background
RS-Logo RS-Logo Mini
  • Contact
  • Location: US - United States
Choose Location
Contact

Application Notes for R&S®DST200

Learn how to configure Rohde & Schwarz products to fit your application.

  • Applications
More downloads
R&S®DST200 Overview
Filter by Content
  • White Paper 2
  • Application Note 1
Website Content

Website Content

Find more relevant information about our Products and Solutions.

3 Results

LTE UE receiver performance measurements

LTE user equipment (UE) receiver performance has significant impact to cellular radio network coverage and capacity. It determines the maximum data throughput across the air interface between the LTE base station (eNB, evolved node B) and the mobile network subscriber UE, thus it determines the total capacity across the air interface. Therefore, it is one of the most important measurements to verify the actual receiver performance of individual devices, and a key metric to compare different devices, in particular.This paper shall give an introduction to receiver performance measurements and discusses the measurement metrics as well as the challenges of over the air (OTA) measurements.

31-Aug-2017 | AN-No. 1ST001

Antenna Array Testing - Conducted and Over the Air: The Way to 5G

5G networks will need to offer more capacity and flexibility while lowering the operational expenses of the system. Two new technologies can simultaneously address both the increase in capacity and the increase in energy efficiency: Virtualization & Massive MIMO. This white paper provides an overview of test solutions addressing current and future requirements for antenna verification including both conducted and over-the-air (OTA) test methods, which result from applying Massive MIMO antenna technology.This white papers complements the white paper (1MA276) from Rohde & Schwarz, which introduces fundamental theory behind beamforming antennas and provides calculation methods for radiation patterns, a number of simulation results as well as some real world measurement results for small linear arrays.

11-Nov-2016 | AN-No. 1MA286

LTE and Bluetooth® in-device coexistence with WLAN

Modern mobile phones can support cellular and noncellular wireless communications standards at the same time. This means, however, that the subsystems must operate in very close proximity to each other within a single device (in-device coexistence). The resulting high level of reciprocal leakage can at times cause considerable interference.This application note employs preliminary theoretical analysis and demonstrates how the problems of indevice coexistence can be measured. For german version please visit .

28-Apr-2015 | AN-No. 1MA255

background
facebook
youtube
feed
LinkedIn
twitter
Rohde & Schwarz USA, Inc.
Rohde & Schwarz is striving for a safer and connected world with its leading-edge solutions. Committed to innovation for more than 90 years, the independent technology group acts long-term and sustainably, making it a reliable partner to its industry and government customers worldwide.
Address

6821 Benjamin Franklin Drive

Columbia, MD 21046

USA

Contact

1-888-837-8772

Info@rsa.rohde-schwarz.com

© 2024 Rohde & Schwarz

  • Do not sell my personal information
  • Imprint
  • Statement of Privacy
  • Terms & conditions
  • Jobs & Career
  • Terms of use