R&S®FE110ST Frontend

SUB-TERAHERTZ, ABOVE EXPECTATIONS

R&S®FE110ST Frontend
Open Lightbox
R&S®FE110ST Frontend
Open Lightbox
R&S®FE110ST Frontend
Open Lightbox
R&S®FE110ST Frontend
Open Lightbox
R&S®FE110ST Frontend
Open Lightbox
R&S®FE110ST Frontend, Front High R&S®FE110ST Frontend, Front High R&S®FE110ST Frontend, Front High R&S®FE110ST Frontend, Side view R&S®FE110ST Frontend, Side view

Key facts

  • Fully calibrated solution
  • Ease of operation
  • Integrated to base units
  • Smart accessories
  • Compact form factor

Frequency extension to 110 GHz

The R&S®FE110ST extends the frequency of the R&S®SMW200A and R&S®SMM100A vector signal generators to the frequency range from 70 GHz to 110 GHz. After connection via LAN interface the frontend is fully integrated to the firmware of the base units. This ensures an easy-to use and calibrated solution which acts like one instrument. Plug it in and start designing and testing the next generation automotive radar or mobile communications today.

Features & benefits

Fully calibrated solution

The R&S®FE110ST is designed as an external frontend for the R&S®SMW200A and R&S®SMM100A vector signal generators. Every R&S®FE110ST is fully characterized during production. As soon as the R&S®FE110ST is connected via LAN, the correction data in the frontend automatically transfers to the base unit, ensuring a fully calibrated signal generation solution and reducing the time and equipment needed for setup and calibration while enhancing measurement fidelity.

Open Lightbox

SMW200A connected to FE110ST frontend

Ease of operation

The R&S®FE110ST fits seamlessly into the operating concept of the R&S®SMW200A and R&S®SMM100A vector signal generators. As soon as the frontend is connected with a LAN, IF and  reference frequency, the R&S®SMW200A and R&S®SMM100A are converted into signal generators for the frequency range between 70 to 110 GHz. Setting up automated measurements is easy and reliable as the remote commands stay the same. 

Open Lightbox

Excellent signal performance

Generating wideband-modulated signals with excellent modulation quality is essential when developing products for next generation automotive radar or mobile communication. The R&S®FE110ST has outstanding modulation quality. A  5G NR signal with a channel bandwidth of 2 GHz (960 kHz SCS) and QPSK modulation can be analyzed with an EVM better than -39 dB (at 88 GHz). This excellent modulation quality is maintained over a wide dynamic range. 

Open Lightbox

 EVM values versus output power at different center frequencies

Smart accessories

External bandpass filters optimize spur performance and are available as options for the R&S®FE110ST and R&S®FE110SR. The R&S®FE110-Zxx waveguide bandpass filters have low insertion loss and an excellent voltage standing wave ratio. Device characteristics are stored on an EPROM which is automatically considered by the base units for a fully calibrated solution. Additional accessories like waveguide adapters (R&S®FE110-Z20), antennas or coax adapter to 1 mm are also available.

Open Lightbox

FE110ST with connected bandpass filter FE110-Zxx

Compact form factor

The compact design allows the R&S®FE110ST to be positioned closely to the device under test. This minimizes the length of additional RF feed lines that can increase losses. Short distance to the DUT reduces the level ripple over frequency and improves signal quality. The R&S®ZZA-FE01 frontend height adjustement has adjustable feet and versatile mounting points which allow flexible positioning of the R&S®FE110ST in a chamber. 

Open Lightbox

Mounted frontend with ZZA-FE01 frontend height adjustement

Available options

External accessories
Product
Description
R&S®FE110-Z10

Order number 1348.5230.02

Description

Bandpass filter

External bandpass filter (70-86 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z01

Order number 1348.5147.02

Description

Bandpass filter

External bandpass filter (75–90 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z02

Order number 1348.5153.02

Description

Bandpass filter

External bandpass filter (80–95 GHz) for the R&S®FE110ST and R&S®FE110SR 
 

R&S®FE110-Z03

Order number 1348.5160.02

Description

Bandpass filter

External bandpass filter (85–105 GHz) for the R&S®FE110ST and R&S®FE110SR 

R&S®FE110-Z04

Order number 1348.5199.02

Description

Bandpass filter

External bandpass filter (94-110 GHz) for the R&S®FE110ST and R&S®FE110SR 
 

R&S®FE110-Z20

Order number 1348.5224.02

Description

WR10 waveguide-to-waveguide adapter

Waveguide section straight. Length: 40mm

R&S®SGH110G20

Order number 1537.3262.02

Description

Standard gain horn antenna

75 to 110 GHz, 20 dBi Connector waveguide WR10 

R&S®SGH110G25

Order number 1538.5852.03

Description

Standard gain horn antenna 

75 to 110 GHz, 25 dBi Connector waveguide WR10

R&S®WCA110

Order number 3626.1067.02

Description

Waveguide Coax Adapter, WR10 to 1 mm (f)

75 GHz to 110 GHz

R&S®WCA110

Order number 3626.1067.03

Description

Waveguide Coax Adapter, WR10 to 1 mm (m)

75 GHz to 110 GHz

Mechanical accessories
Product
Description
R&S®ZZA-FE01

Order number 1348.5330.02

Description

Frontend height adjustment

Height adjustment and mounting kit for external frontends. 
Horizontal or vertical assembly possible.

Tools
Product
Description
R&S®ZCTW

Order number 1175.2014.02

Description

Torque wrench for waveguide flange screws

Related videos

Towards 6G: MIMO measurements up to 110 GHz

This video demonstrates signal transmission and analysis of a 2x2 MIMO signal at 90 GHz.

12-Mar-2024

Noise Figure and Gain Measurements of amplifiers from 75 GHz to 110 GHz

This video shows how to measure noise figure and gain of an amplifier at around 90 GHz using the smart noise source R&S FS-SNS110 and the external frontend R&S FE110SR in combination with a spectrum analyzer.

11-Mar-2024

Signal generation and analysis up to 110 GHz with frontends

This video shows the excellent signal performance and the support of swept measurements and local oscillator coupling of the FE frontend series.

11-Mar-2024

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.