R&S®HE400DC handheld directional antenna with downconverter

Handheld directional antenna for locating transmitters and interferers

R&S®HE400DC handheld directional antenna with downconverter
Open Lightbox
R&S®HE400DC handheld directional antenna with downconverter
Open Lightbox
R&S®HE400DC handheld directional antenna with downconverter
Open Lightbox
R&S®HE400DC handheld directional antenna with downconverter
Open Lightbox
R&S®HE400DC handheld directional antenna with downconverter
Open Lightbox
R&S®HE400DC with R&S®HE400SHF antenna module R&S®HE400DC with R&S®HE400SCB antenna module R&S®HE400DC with R&S®HE400UWB antenna module R&S®HE400DC with R&S®HE400LP antenna module R&S®HE400DC with R&S®HE400VHF antenna module

Key facts

  • Operating frequency range from 20 MHz to 20 GHz
  • For locating transmitters and interference sources
  • Frequency extension with downconverter for R&S®PR200
  • Provides standard interfaces for integration with third-party radio systems
  • Exchangeable antenna modules

Portable antenna with downconverter

The R&S®HE400DC handheld directional antenna with downconverter extends the frequency range of the R&S®PR200 portable monitoring receiver from 8 GHz to 20 GHz. The antenna and the R&S®PR200 are used to locate transmitters and interference sources. Bearings are found by manually pointing the antenna in the direction where the signal is strongest.
The antenna consists of an antenna handle, a customized receiver cable set and different antenna modules that can easily be attached using a locking ring. Six different antenna modules are available for reception of vertically or horizontally polarized signals.

Features & benefits

Distinct directional pattern

For unambiguous measurement results  

The directional antenna modules for the R&S®HE400DC feature distinct directional patterns, so that a clear direction can be determined by pointing the antenna towards a signal source.
When in reflective surroundings, multiple measurements from different locations may be needed.

Wide dynamic range

Thanks to switchable active and passive modes (LNA on/off)  

A built-in low-noise amplifier (LNA) can be activated to increase system sensitivity. In passive mode, the amplifier is bypassed and the antenna can also be used near powerful transmitters

Very wide frequency range in a compact size

For easy handling  

The modularity of the R&S®HE400DC together with its individual antenna modules enable a very compact solution.
Operators can cover the wide frequency range of 20 MHz to 20 GHz with a portable system.

Automatic detection of antenna module/polarization

For carefree operation  

The R&S®HE400DC detects the attached antenna module and its polarization. The data is sent to the connected R&S®PR200 portable monitoring receivers. The receiver uses this data to automatically select the correct antenna factor table. The operator does not have to change this manually. There is no risk of measurement results being wrong because of an incorrect antenna factor table.

Trigger button for external receiver

For releasing a measurement  

The R&S®HE400DC microwave handheld directional antenna features a trigger button for starting a measurement. The connected R&S®PR200 portable monitoring receiver performs the measurement and stores the results. The user can instantly start measuring a signal without operating the receiver.

Fatigue-free operation

Antenna design and material keep weight to a minimum  

The R&S®HE400DC microwave handheld directional antenna is low weight and easy to handle. It even comes with a comfortable arm rest that minimizes operator fatigue even when measurements take somewhat longer.

GNSS receiver and electronic compass included

For valuable additional information  

When dealing with signals of interest, knowing the strength, on-air time, the direction of origin and receiving location are all important. The R&S®HE400DC uses GNSS data to provide the operator’s location and electronic compass data to provide the direction of the antenna. This information is forwarded to the receiver and can be stored together with the measured signal data.

Specifications
Antenna module Frequency range Delta mode
R&S® HE400VHF 20 MHz to 200 MHz No
R&S® HE400UWB 30 MHz to 6 GHz No
R&S® HE400LP 450 MHz to 8 GHz No
R&S® HE400CEL 700 MHz to 2.5 GHz Yes
R&S® HE400SCB 1.7 GHz to 6 GHz Yes
R&S® HE400SHF 5 GHz to 20 GHz No

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.