R&S®TS8996 RSE test system

RSE wireless EMC spurious emission

Key facts

Frequency range from 30 MHz to 12.75 / 26 / 40 GHz
Includes signalling for GSM (2G), WCDMA (3G), LTE (4G), 5G, WLAN and Bluetooth
Unique technique shifts to ideal dynamic range for test receiver
Measurement up to 325 GHz for 5G FR2 with high sensitivity of -40 dBm/MHz

Get a Quote

The R&S®TS8996 RSE test system is designed for EMI and radiated spurious emission testing on wireless devices in semi-anechoic or fully anechoic chambers. The modular design makes it easy to extend the system to include new communications technologies. Typical devices under test include mobile phones or radio sets along with radiated measurements of other short-range devices. Standards require a wide range of test setups and a wide and high frequency range (up to 40 GHz). ESW or FSW frequency ranges are extended up to 325 GHz with option B21 using receive units TC-RSE for 5G FR2. Dedicated RSE test routines are also covered for this frequency range.

Features & benefits

Supported standards

Compliant with relevant RSE and EMI standards for wireless devices

The RSE and EMI testing are covered for the following standards:
ETSI EN 300 607-1
ETSI EN 301 908-1
ETSI EN 301 908-25
ETSI EN 300 328
ETSI EN 301 893
ETSI EN 303 687
ETSI EN 300 220
ETSI EN 301 489 (incl. sub articles)
FCC CFR47 part 15
FCC CFR47 part 20

Modular

Modular system design

The test system can be easily adapted to customer requirements for supported technologies, standards, frequency ranges or combinations with other EMC tests. Existing EMC test systems can be upgraded to TS8996 supported wireless device testing.

Dynamic range shift

Unique measurement procedure by shifting dynamic range

Using notch filters for carrier suppression is not convenient in a large number of the bands and bandwidths used by modern communications technologies, such as WCDMA (3G), LTE (4G) and 5G FR1. The R&S®OSP-B155G plug-in module can measure radiated spurious emissions for all bands and bandwidths in one compact unit. Near the carrier, signal is shifted to the ideal dynamic range for the test receiver to measure spurious emissions in the presence of the carrier.

Supported Technologies

All common technologies supported

The main technologies for integrated signaling with CMW/CMX communications testers:
- GSM (2G)
- WCDMA (3G)
- LTE (4G)
- 5G FR1
- 5G FR2
- WLAN incl. WIFI6
- Bluetooth
DUT controls or their counterparts in the ELEKTRA test software monitoring interface can support other technologies.

EMS extension

Easily extendable to EMS measurements including audio breakthrough

The RSE and EMI test system can be easily expanded to include a commercial EMS test system. BER, FER and PER can be used for monitoring depending on the technology. Audio breakthrough measurements (ABT) are also available for devices with audio links.

Turnkey solution

The TS8996 is available as a turnkey solution

The complexity of radiated measurements for wireless devices means that purchasing the TS8996 as a turnkey solution can quickly get operations up and running. The core TS8996 components can also be purchased independently by experienced customers

Microwave extension

5G FR2 device support with measurements up to 200 GHz

5G FR2 RSE measurements in line with ETSI EN 301 908-25 and FCC are supported with a sensitivity of -40 dBm/MHz at 1 m testing distance in the frequency range from 41 GHz to 200 GHz. Special tests cover automated measurements of 5G FR2 spurious emissions in line with FCC incl. TRP for RSE.

**Automated measurement 41 GHz to 200 GHz for 5G FR2**

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

First name

Last name

E-mail

Company

Country

Phone (e.g. +1 400 123 5678)

Zip

City

Inquiry

Email confirmation (optional)

Your request has been sent successfully. We will contact you shortly.

An error is occurred, please try it again later.

General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.