Key facts
- For use with the R&S®ZNA, R&S®ZVA, R&S®ZVT20 and R&S®ZCxxx converters
- Highest dynamic range
- For antenna measurement setups or unidirectional S-parameter measurements
Key facts
The R&S®ZRXxxx millimeterwave receiver modules can be used with the R&S®ZNA, R&S®ZVA and R&S®ZVT. The receivers are available from 50 GHz to 1100 GHz. In combination with a ZCxxx converter, the setup provides the highest dynamic range for antenna measurements, but can also be used for unidirectional S-parameter measurements.
In combination with R&S®ZCxxx converters, the R&S®ZCxxx receivers provide the highest dynamic range for antenna measurement setups. For frequencies between 60 and 110GHz a dynamic range of 150dB is possible.
Unidirectional S-parameters can be applied in combination with a R&S®ZCxxx converter. In order not to saturate the receiver, a fixed waveguide attenuator comes standard with the R&S®ZRXxxx.
Order number 3658.5368.02
Order number 3637.1511.02
Order number 3637.1528.02
Order number 3622.0737.02
Order number 3622.0743.02
Order number 3622.0750.02
Order number 3622.0766.02
Order number 3658.5374.02
Order number 3622.0772.02
Order number 3658.5745.02
Order number 3658.5868.02
Order number 1325.6101.02
Converter power supply (supplies two converters)
Order number 1323.8159.12
Power Supply Cable 1.2 m
Order number 1323.8159.16
Power Supply Cable 1.6 m
Order number 1323.8159.20
Power Supply Cable 2 m
Order number 1307.7500.30
Waveguide calibration kit WR15, 50 GHz to 75 GHz (without sliding match)
Order number 1307.7500.31
Waveguide calibration kit WR15, 50 GHz to 75 GHz (with sliding match)
Order number 1307.7700.10
Waveguide calibration kit WR12, 60 GHz to 90 GHz (without sliding match)
Order number 1307.7700.11
Waveguide calibration kit WR12, 60 GHz to 90 GHz (with sliding match)
Order number 1307.7100.10
Waveguide calibration kit WR10, 75 GHz to 110 GHz (without sliding match)
Order number 1307.7100.11
Waveguide calibration kit WR10, 75 GHz to 110 GHz (with sliding match)
Order number 1307.7900.10
Waveguide calibration kit WR08, 90 GHz to 140 GHz (without sliding match)
Order number 1307.7900.11
Waveguide calibration kit WR08, 90 GHz to 140 GHz (with sliding match)
Order number 1311.8807.10
Waveguide calibration kit WR06, 110 GHz to 170 GHz (without sliding match)
Order number 1311.8807.11
Waveguide calibration kit WR06, 110 GHz to 170 GHz (with sliding match)
Order number 1307.8106.10
Waveguide calibration kit WR05, 140 GHz to 220 GHz (without sliding match)
Order number 1307.8106.11
Waveguide calibration kit WR05, 140 GHz to 220 GHz (with sliding match)
Order number 3628.5699.02
Waveguide calibration kit WM-1092, 170 GHz to 260 GHz
Order number 1307.7300.30
Waveguide calibration kit WR03, 220 GHz to 325 GHz (without sliding match)
Order number 1307.7300.31
Waveguide calibration kit WR03, 220 GHz to 325 GHz (with sliding match)
Order number 1339.4070.02
Waveguide calibration kit WM-710, 260 GHz to 400 GHz
Order number 1322.3099.10
Waveguide calibration kit WM-570, 330 GHz to 500 GHz
for R&S®ZC500
Order number 1314.5550.10
Waveguide calibration kit WR02, 325 GHz to 500 GHz
for R&S®ZVA-Z500
Order number 1322.3101.02
Waveguide calibration kit WM-380, 500 GHz to 750 GHz
Order number 1322.3118.02
Waveguide calibration kit WM-250, 750 GHz to 1100 GHz
Order number 1332.5388.02
Converter Control Software
(for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx)
Order number 1307.7022.02
Freq. converter control
(for R&S®ZVA24/40/50/67);
Order number 1302.5544.02
USB-to-IEC/IEEE adapter
(for control of external devices via IEC/IEEE bus)
Order number 1323.7730.00
Converter set transport case
Order number 1314.5373.00
Adapter SMA m/m angle
0 Hz to 18 GHz
Order number 1314.5380.00
Adapter SMA m/f angle
0 Hz to 18 GHz
Order number 1307.0886.02
2-way Wilkinson power divider
4 GHz to 27 GHz
Order number 1323.7746.24
Adapter kit
including a power divider and two right angle SMA (m/m) adapters (required if R&S®ZVA24 var. 28 or R&S®ZVA40 var. 48 (VNAs with four sources) is used)
Order number 1323.7746.50
Adapter kit
including four 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA50 is used)
Order number 1323.7746.67
Adapter kit
including a power divider, two right angle SMA (m/m) adapters, three 1.85 mm (f) to 2.92 mm (m) adapters and four 1.85 mm (m) to 2.92 mm (f) adapters (required if R&S®ZVA67 is used)
Order number 1314.5467.02
Torque wrench for waveguide flange screws
Order number 1175.1960.00
Angled wrench for waveguide flange screws
Order number 1175.2014.02
Torque wrench for waveguide flange screws
Order number 1175.2014.03
Torque wrench for waveguide flange screws
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.