The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

Verification kits are used to perform uncertainty evaluations of vector network analyzers. Option R&S®ZNA-K50(P) provides additional uncertainty analysis.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

Calibration accessories for frequency converting measurements, Wide band application

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

Get the most out of your high-frequency band test and measurement tasks with versatile mmWave converters from Rohde & Schwarz.

Noise figure measurement with vector network analyzers

Millimeterwave mini receiver module for antenna test systems, consisting of a harmonic mixer as downconverter, a booster amplifier for controlled input power and a low noise amplifier for the IF signal.

Millimeterwave receiver modules for antenna test systems with highest dynamic range.

Rohde & Schwarz offers a wide range of versatile vector network analyzers and accessories with excellent characteristics.

The R&S®ZCxxx millimeterwave converters allow millimeterwave measurements in the frequency range up to 1.1 THz.

R&S®ZVA-Zxxx millimeterwave converters have a wide dynamic range. Rohde & Schwarz converters are very convenient to operate and enable fast measurements.

R&S®ZNA高端矢量网络分析仪具备出色的射频特性、独特多方位的硬件架构和以被测设备为中心的操作概念，能够更加轻松地执行高标准测量。

A computer simulation for the R&S®ZNA, R&S®ZNB, R&S®ZNBT and R&S®ZND that can be used to test a remote control program without the need for any VNA hardware.

R&S®RF Ports Alignment Software - Tailored solution for calibrating amplitude, time and phase of multi-channel SMW200A setups.

R&S®ZN-Z2xx: high-end manual calibration kits, male and female standards, up to 67 GHz, S-parameter based characterization.

Switch matrix - configurable switch matrix for up to 48 network analyzer ports, up to 26.5 GHz.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

Rohde & Schwarz User Manual for the R&S®ZNA Vector Network Analyzer

Models: R&S®ZNA26, R&S®ZNA26, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA50, R&S®ZNA50, R&S®ZNA67, R&S®ZNA67, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT

Models: R&S®ZNA26, R&S®ZNA26, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA50, R&S®ZNA50, R&S®ZNA67, R&S®ZNA67, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT

Models: R&S®ZNA26, R&S®ZNA26, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA43, R&S®ZNA50, R&S®ZNA50, R&S®ZNA67, R&S®ZNA67, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT, R&S®ZNA67EXT

With high precision, an intuitive user interface and uncertainty bands provided directly on the screen, the R&S®ZNA takes accuracy to a new level.

19-Jul-2021

The R&S®ZNA vector network analyzer with integrated LO output and direct IF input options is a simple, cost-effective solution for 2-port and 4-port measurements using Rohde & Schwarz mmWave converters.

27-Apr-2023

Learn about the differences between LCR meters and VNAs. Learn how to measure impedance with a network analyzer and how LCR meter impedance measurement works.

The R&S®ZNA vector network analyzer offers a dynamic range and unlocks potential applications that previously could not be addressed with a vector network analyzer.

07-Jan-2019

The R&S®ZNA vector network analyzer with integrated LO output and direct IF input options is a simple, cost-effective solution for 2-port and 4-port measurements using Rohde & Schwarz mmWave converters.

19-Jul-2021