Rohde & Schwarz at European Microwave Week 2020 - virtual

Technology symposium is back in 2024

This video is about ROHDE & SCHWARZ

Impressions - MNT Forum 2023

Impressions from Mobile Network Testing Forum 2023 at the Rohde & Schwarz headquarter in Munich.

Media Storage Solutions

SpycerNode storage works quietly behind the scenes to help deliver your favorite productions

Air Space World 2023 Customer Voice Skyguide

Conformance test for O-RAN fronthaul from Rohde & Schwarz, VIAVI Solutions, and Analog Devices

Watch a demonstration of O-RAN radio unit conformance test. Using a test setup from Rohde & Schwarz and VIAVI Solutions run tests conforming to O-RAN ALLIANCE specifications on an Analog Devices 8T8R radio reference platform.

Network engineering and troubleshooting

With this demo we present our MNT solutions for UE and network engineering, troubleshooting and Open RAN testing.

Ultra wideband performance testing over the air for R&D

Watch our experts at MWC 2023 to learn about fully automated test solutions that help to quickly test and compare various device designs in order to achieve the most accurate UWB localization.

Testing 6G JCAS in FR2 frequency bands

The demo includes R&S signal generators and signal and spectrum analyzers to demonstrate and visualize cutting edge JCAS test capabilities by Rohde & Schwarz.

Towards 6G: AI/ML-based neural receiver

The wireless industry anticipates that a future 6G standard supports an Artificial Intelligence / Machine Learning (AI/ML) based air interface natively.The wireless industry anticipates that a future 6G standard supports an Artificial Intelligence / Machine Learning (AI/ML) based air interface natively. In this joint demonstration, Rohde & Schwarz and Nvidia demonstrate a neural receiver approach, using a trained machine learning model for signal processing tasks such as channel estimation, channel equalization, and demapping. Due to the lack of a 6G standard, we showcase a 5G NR PUSCH multi-user MIMO scenario, emulating two users with 2x2 MIMO, that are independently faded to simulate realistic channel conditions using the R&S SMW200A vector signal generator. The signal is captured using the MSR4 satellite receiver and transferred to a server. Our server-based testing (SBT) framework, including vector signal explorer (VSE) microservices is used to pre-process the data. The generated post-FFT data is input to

Wi-Fi 7 (IEEE 802.11be) 4x4 true-MIMO testing

Rohde & Schwarz demonstrates Wi-Fi 7 (IEEE 802.11be) 4x4 true MIMO measurements up to 320 MHz bandwidth and up to 6 GHz frequency band based on the R&S CMP180 CMPflexx system using a Wi-Fi 7 router as device under test (DUTs).

Mobile Network Testing in Private networks

The pre-condition, to reach the expected Service Level of Quality is a good network deployment in an interferer free area. Measuring, troubleshooting and verifying the network availability, throughput and latencies is the key, ensuring full functionality for mission critical use-cases in all kind of private networks or in a B2B environment

Secure call-sign identification

Find out more about ATC direction finders for situational awareness and secure call-sign identification from Rohde & Schwarz.

Strong security for critical infrastructure

Find out more about IP networks of ANSP infrastucture and network encryption for air traffic control.

Network integration flexibility

Find out more about flexible network integration from ATC software defined radios from Rohde & Schwarz.

Lifecycle support through service level agreements

Find out more about long-term availability and operational readiness with CERTIUM SERVICE from Rohde & Schwarz.

Advanced voice quality assurance system

Find out more about insightful analytics and detailed monitoring of ATC voice networks.

LDACS paves the way to ATM digitalization

Find out more about LDACS (L-band Digital Aeronautical Communications System), the new air-to-ground communications standard.

High availability 5kW HF high-power transmitters

Find out more about 5 kW HF transmitter from Rohde & Schwarz provides improved quality and high availability.

Application video: Accelerating ADAS-AD with Hardware-in-the-Loop Testing

High-Precision In-Band Radar Test Solution

Check out R&S high-precision in-band radar testing solutions live from the show floor at CES 2022.

Rethink 5G testing

Rethink 5G testing

CES: Automotive Radar Object Simulation for Validation

Check out R&S Automotive Radar Object Simulation solutions for validations, live from the show floor at CES 2022.

CES: Ultra-Wideband Device Testing

Check out this brief demo on R&S solutions for ultra-wideband devices. Live from the CES 2022 trade show.

Rohde & Schwarz Technology Symposium 2021

SaaS RF test platform

R&S Cloud4Testing is a software as a service (SaaS) platform that offers customers access to R&S software suites such as VSE and WinIQSIM2.

NPR (Noise Power ratio) measurements with the R&S®FSWP phase noise analyzer

The R&S®FSWP with its outstanding sensitivity to measure phase noise is now additionally equipped with the Noise power ratio (NPR) option.

Vector receiver load-pull measurements

The combination of Maury Microwave Tuners plus IV CAD software together with the R&S®ZNA vector network analyzer makes vector receiver load-pull measurements easy.

De-embedding options for R&S VNAs

The R&S ZNB have new deembedding options integrated into the FW, which can easily be run with the R&S VNA.

Ultra wideband 802.15.4a/4z testing

Ultra-wideband communication, as standardized by IEEE 802.15.4 enables very low power communication and very accurate ranging in license-exempt spectrum.

5G FR2 RF testing

Tailored solution for OTA measurements thanks to high-frequency frontend modules which can be placed close to measurement chamber.

6G - Extension to a D-Band antenna measurement system

The ATS1000 CATR based 5G NR mmWave test chamber is fully shielded from the outside world to provide the ideal environment for uninterrupted measurements.

New handheld VNA for radar & satellite ground station measurements

The R&S®ZNH is a full 2-port handheld vector network analyzer and comes in four models with maximum frequency of 4 GHz, 8 GHz, 18 GHz or 26.5 GHz.

Phase-coherent multichannel pulse analysis

Scalable easy-to-configure solution for Radar/EW systems for accurate and phase-coherent analysis of multiple pulsed signals.

Automotive radar signal analysis in the E-band

Automotive radar signal analysis in the E-band with up to 8.3 GHz analysis bandwidth with just a single instrument.

Automotive radar testing in a compact antenna test range

The R&S®ATS1500C antenna test chamber is based on the compact antenna test range method and is specially designed for the latest automotive radar sensors.

At the EuMW 2021 virtual booth we will present a new handheld instrument

Webinar: Demystifying deembedding for testing high-speed digital and RF signals

This webinar explores the impact of the measurement setup on the results and the optimal methods required when dealing with high-speed digital and RF signal measurements.

5G NSA signaling testing for FR2

For developers of 5G devices, Rohde & Schwarz features the R&S®CMX500 radio communication tester that enables non-standalone (NSA) and standalone (SA) signaling tests in both FR1 and FR2 frequency ranges.

Milimeter-wave 5G network measurements using scanners

With the release of the TSME44DC scanner downconverter, operators now have the ability to passively capture network LTE and 5G performance and quality data from the air interface.

Compact CATR OTA chamber for 5G FR2 testing

Signaling test in the new mmWave-based 5G frequency of FR2 requires an OTA test setup. The R&S®ATS800R CATR rack based antenna test system is designed for FR2 over-the-air measurements in R&D.

T&M for wireless communications technology

Since MWC2020 in Barcelona will not take place, Rohde & Schwarz will bring their latest T&M innovations for 5G devices, base stations and 5G mobile networks, as well as for connected cars, smart factories and 5G broadcast technology to your displays.

Compact and flexible CATR system for 5G FR2 testing

Rohde & Schwarz presents the most compact CATR solution R&S®ATS1800C. The system allows to test heavier mmWave devices in a big quiet zone yet on a small chamber footprint.

Most compact 5G conformance test system for mmWave (FR2)

Rohde & Schwarz presents its innovative 5G conformance test solution for both FR1 and FR2. The latest version of the popular R&S®TS8980 RF test system now covers 5G NR.

Turnkey RF test solution for 5G FR2 devices

High-volume testing in the mmWave frequency range (FR2) requires an over-the-air environment. The R&S®CMPQ test solution provides accurate and reliable measurement results under radiated conditions for 5G NR non-signaling tests in FR2.

5G NR maximum IP data throughput tests of 2 Gbps

In this video, the R&S®CMX500 establishes an LTE anchor cell and a 5G NR TDD cell, configured with 4x4 MIMO and modulation of DL 256QAM to achieve a maximum data end-to-end throughput of 2 Gbps on IP layer using TCP data with a Qualcomm Snapdragon X55 modem.

5G NSA signaling testing with dynamic spectrum sharing

The verified test solutions from Rohde & Schwarz, based on the R&S®CMX500 and R&S®CMW500 radio communication testers and the R&S®CMsquares unified test software, simplifies signaling testing with DSS in non-standalone (NSA) mode.

5G multichannel MIMO testing for FR1

Rohde & Schwarz presents cross-channel measurements up to 4x4 MIMO on 5G transmissions in the FR1 range for the development and verification of 5G base stations and small cells.

5G FR2 base station testing over the air

Rohde & Schwarz presents a unique solution for OTA tests on 5G NR base stations in the FR2 range. The new R&S®FE44 frontend modules support up-/downconversion of lower-frequency IF signals to RF.

WLAN 802.11ax AP and station testing under realistic operation conditions

Rohde & Schwarz presents an IEEE 802.11ax test solution for WLAN access points and stations in multi-user operation (OFDMA).

Highly efficient Wi-Fi 6 plus Multi-Gigabit Ethernet switches

LANCOM addresses how organizations can realize powerful LAN and WLAN infastructures based on WiFi-6 access points and multi-gigabit ethernet switches - designed for data-intensive applications today and tomorrow. Including software defined cloud management.

High performance RF testing for 5G BTS production

Rohde & Schwarz Server-Based Testing (SBT) supports customers in accelerating their measurement tasks in automated production and component characterisation environments.

LANCOM SD-WAN for distributed networks already planned with 5G router support

LANCOM addresses the release of a 5G router later this year as a completion of the already very successful LANCOM SD-WAN solution called LMC.

New Unified Firewall models join cloud based SD-SECURITY by LANCOM

LANCOM addresses the release of new LANCOM R&S®Unified Firewall models. The UF-910 with full hardware redundancy for large locations is availaibe now.

5G multicast solution

Thanks to this solution, mobile network operators can face congestion and overload in their cellular networks when it comes to delivering highly critical live events and linear content which constitutes a big portion of video consumption.

Cellular V2X testing in R&D and production

Cost and time saving C-V2X scenario simulation with the evolution of the C-V2X framework of the Rohde & Schwarz hardware with CANoe.car2x and dyna4 virtual test tools it is now possible to simulate traffic jam scenarios. Watch the video

Interference hunting in 5G networks

Rohde & Schwarz introduces the new R&S®PR200 portable monitoring receiver and in particular the gated spectrum trigger function that enables users to effectively separate uplink and downlink TDD signals, on the spectrum display.

5G network interactivity test - short

With the interactivity test, operators can measure the fundamental 5G network performance characteristics of latency, throughput and availability and derive network quality for real-time applications like eGaming and AR/VR in a single integrated test.

How R&S®PACE2 classifies IP traffic despite encryption and NAT

The video explains how application classification and extraction of metadata and content reveal actionable information from IP traffic. Learn how advanced detection methods even allow for network adress translation (NAT) visibility and classification of encrypted traffic.

Wake up signal test for improved power efficiency in NB-IoT devices

Rohde & Schwarz and Goodix (CommSolid) are first to demonstrate exhaustive test functions for the newly introduced NB-IoT wake up signal (NWUS), the latest 3GPP Release 15 feature for NB-IoT devices to further reduce power consumption.

CES 2020 - Oscilloscope automotive radar

Did you miss CES 2020? See what our experts introduced at the show.

CES 2020 - Chamber demonstration

Did you miss CES 2020? See what our experts introduced at the show. Chamber demonstration.

CES 2020 - QAR demonstration

Did you miss CES 2020? See what our experts introduced at the show. QAR demonstration.

CES 2020 - Automotive radar - AREG and FSW

Did you miss CES 2020? See what our experts introduced at the show. Automotive radar - AREG and FSW

C_Impressions - Technology Symposium Singapore

Rohde & Schwarz has been hosting the 4th UAM Ingolstadt Network Meeting

Around 150 distinguished guests from the network and the industry joined this event. You missed it? Look and see all highlights now.

Impressions - MNT Forum 2017

In 2017 more than 120 participants from 33 countries joined the MNT Forum.

Power integrity

We will be discussing power integrity issues, root causes and countermeasures in sensitive electronic designs.

Over-the-air RF parametric testing for 5G FR2 devices presented at GSMA MWC 2019

Rohde & Schwarz presents a compact OTA test solution for 5G FR2 devices at GSMA Mobile World Congress 2019 in Barcelona.

IP network analytics presented at GSMA MWC 2019

Rohde & Schwarz addresses at Mobile World Congress 2019 how communication service providers (CSPs) can use IP network traffic analytics to secure granular visibility of entire networks via real-time reporting on network and subscriber data.

Smart benchmarking of mobile networks presented at GSMA MWC 2019

Smartbenchmarker is the premium user interface for network benchmarking that features indoor mapping via iBwave, safe driver view, route guidance, remote monitoring and control.

IoT network testing presented at GSMA MWC 2019

Rohde & Schwarz presented new smartphone-based NB-IoT measurement capability for site acceptance and verification complimented by an enhancement to the existing NB-IoT scanner measurements for network coverage and performance to now include LTE-M at GSMA MWC 2019.

5G NR mobile network testing presented at GSMA MWC 2019

Rohde & Schwarz presented mobile network testing solutions for the complete 5G lifecycle, covering sub-6 GHz and mmWave bands that enable the realisation of 5G NR as it moves from trial networks to commercial deployments at GSMA MWC2019.

Rohde & Schwarz presents its leading mobile network testing solutions at GSMA MWC 2019

At our Rohde & Schwarz mobile network testing booth we are showing our complete portfolio of solutions to test the performance and quality of mobile networks.

3GPP cellular V2X testing in production presented at GSMA MWC 2019

Rohde & Schwarz demonstrates cellular V2X non-signaling testing at GSMA Mobile World Congress 2019 in Barcelona.

5G broadcast on air presented at GSMA MWC 2019

Rohde & Schwarz presents a solution for the future of media delivery at GSMA MWC 2019. In cooperation with Technische Universitaet Braunschweig, Rohde & Schwarz demonstrates the world’s first end-to-end solution for 5G Broadcast fully compliant with 3GPP Release 14.

First one box solutions for WLAN 802.11ax MIMO signaling test presented at GSMA MWC 2019

Rohde & Schwarz demonstrated the first signaling test solution for WLAN 2x2 MIMO stations in line with the IEEE 802.11ax standard at Mobile World Congress 2019 in Barcelona.

IoT module testing for smart cities presented at GSMA MWC 2019

Rohde & Schwarz demonstrates tests on IoT modules for smart cities at GSMA Mobile World Congress 2019 in Barcelona.

5G NR massive MIMO base station characterization in FR1 presented at GSMA MWC 2019

Rohde & Schwarz demonstrates precise measurement of far-field properties in the antenna near field at GSMA Mobile World Congress 2019 in Barcelona.

Cellular V2X testing in R&D and production presented at GSMA MWC 2019

Testing critial V2X traffic scenarios in the lab is important for the automotive industry. Rohde & Schwarz demonstrated an easy to use solution for testing the application layer on 3GPP Rel.14 cellular V2X control units in the lab.

5G NR conformance and pre-conformance testing for FR2 devices presented at MWC 2019

Rohde & Schwarz presented conformance testing for 5G NR mmWave devices at GSMA Mobile World Congress 2019 in Barcelona.