Key facts
- Realtime demodulation
- Advanced frontend and FPGA-based demodulation
- Preselection with additional 75 Ω RF input
- Integrated spectrum analyzer
- Video decoder for MPEG-2, H.264 (MPEG-4), HEVC and AVS/AVS+
Key facts
The R&S®ETL TV Analyzer is an all-in-one solution. It combines the functionality of a TV and FM (radio) signal analyzer, a video and MPEG TS analyzer and a spectrum analyzer in a single instrument. The R&S®ETL also contains generators to create analog video signals, audio signals and MPEG-2 transport streams.
Order number 2112.0233.02
High SNR FM frontend
Order number 2112.0104.02
Digital demodulator for single carrier
Order number 2112.0385.02
FPGA extension board
Order number 2112.0340.02
FPGA extension board, high SNR FM
Order number 2118.4030.02
AV decoder and TS processing
Order number 2112.0010.02
R&S®ETL DAkkS (DKD) calibration; contains R&S®ETL-DCV
Order number 2112.0304.03
Universal DTV, ATV, FM interface
Order number 2112.0327.03
RF preselector
Order number 2112.0256.02
DC power supply, 11 V to 19 V
Order number 2112.0262.02
Lithium-ion battery pack, 10 Ah, with battery charger
Order number 2082.0490.31
Documentation of R&S®ETL calibration values
Order number 1300.6008.02
OCXO reference frequency
High precision frequency reference
Order number 1300.6108.02
Additional interfaces
video out, IF out, noise source control, AUX port, connector for the R&S®NRP power sensors
Order number 1300.6208.02
GPIB interface
Order number 1300.5601.02
Narrow resolution filters
Offers a TV trigger function for use in analog TV service applications. Requires R&S®ZVL-K1
Order number 1301.9246.02
AM/FM/φM measurement demodulator
Turns the R&S®ZVL into an analog modulation analyzer for amplitude, frequency, or phase modulated signals. Requires R&S®ZVL-K1
Order number 1109.4487.00
19" rackmount adapter
For mounting a 3/4 19" housing 3 RU high in a standard 19" rack
Order number 2112.0291.02
Hard disk, 80 Gbyte
Order number 2112.0379.02
Mounting kit for R&S®ETL-B300 and R&S®ETL-B310
Order number 2115.1576.02
ATSC MDTV upgrade
Order number 2118.4160.82
Upgrade kit
for R&S®ETL with serial number: 100 500 to 102 009
Order number 2118.4160.81
Upgrade kit
for R&S®ETL with serial number: 102 010 to 102 999
Order number 2118.4160.80
Upgrade kit
for R&S®ETL with serial number: 103 000 to 104 999
Order number 2112.0410.02
FM (radio) firmware
Order number 2118.4024.02
FM (radio) MPX deviation measurement
Order number 2112.0579.02
Measurement Log
Order number 2112.0404.02
DVB-C firmware
Order number 2112.0504.02
J.83/B firmware
Order number 2112.0456.02
ATSC/8VSB firmware
Order number 2112.0462.02
ATSC/8VSB SFN frequency offset
Order number 2112.0556.02
DVB-T, DVB-H firmware
Order number 2112.0562.02
DVB-T, DVB-H SFN frequency offset
Order number 2112.0533.02
T-DMB/DAB firmware
Order number 2112.0540.02
T-DMB/DAB SFN frequency offset
Order number 2112.0485.02
ISDB-T firmware
Order number 2112.0491.02
ISDB-T SFN frequency offset
Order number 2115.1553.02
ATSC MDTV, ATSC/8VSB firmware
Order number 2115.1560.02
ATSC MCTV, ATSC/8VSB SFN frequency offset
Order number 2112.0527.02
DVB-T2 firmware
Order number 2115.1682.02
DVB-T2 SFN frequency offset
requires R&S®ETL-K340
Order number 2118.4047.02
DTMB firmware
Order number 2118.4053.02
DTMB SFN frequency offset
Order number 2118.4060.02
DTMB extended TX measurements
Order number 1346.8884.02
CDR Signal Analysis Software
Order number 2112.0427.02
FM (radio) audio analysis/generator
Order number 2112.0433.02
Analog TV video analysis
Order number 2112.0440.02
Analog multistandard TV video generator
Order number 2112.0591.02
MPEG TS generator/recorder
Order number 2112.0610.02
MPEG analysis/monitoring
Order number 2112.0627.02
In-depth analysis
Order number 2112.0633.02
Data broadcast analysis
Order number 2112.0640.02
TS template monitoring
Order number 2118.4253.02
UHD extension
Order number 2115.1701.02
DVB T2-MI extension
Order number 2118.4260.02
IP input and output
Order number 2115.1360.02
Broadcast drive test software
Efficient coverage analysis for terrestrial broadcast signals
For use with a specific R&S®ETL analyzer
(serial number required)
For configuration examples, see R&S®BCDRIVE product brochure.
Order number 2115.1360.03
Broadcast drive test software
Efficient coverage analysis for terrestrial broadcast signals
For use with a specific R&S®ETH TV analyzer
(serial number required)
For configuration examples, see R&S®BCDRIVE product brochure.
Order number 2112.0479.02
Automated measurement of multiple TV channels
Order number 2116.9393.02
ISDB-T(B) transport streams
ISDB-T streams, transport stream library for R&S®BTC, R&S®VTx, ISDB-TB TS H.264 (Brazil/Argentina), bitstream player required (Software-license)
Order number 2116.9412.02
ATSC-M/H transport streams
ATSC and ATSC Mobile DTV streams, transport stream library for R&S®BTC, R&S®VTx, MPEG2-TS (A/53 and A/153), bitstream player required (Software-license)
Order number 2116.9429.02
DVB-T2 MI streams
DVB-T2 MI streams, library with Multi PLP for R&S®BTC, R&S®VTx, T2MI format, bitstream-player required (Software-license)
Order number 2116.9435.02
EMC streams
EMC test signals, transport stream library for R&S®BTC, R&S®VTx, MPEG-2 TS (moving colorbar, sine tone), bitstream player required (Software-license)
Order number 2116.9558.02
Basic stream library
Order number 2116.9564.02
SDTV extended library
Order number 2116.9570.02
Extended HDTV library
Order number 2116.9587.02
3D TV library
Order number 2116.9641.02
HEVC stream library
Order number 2112.0604.02
HDTV and Dolby® upgrade
Order number 5201.7760.00
Protective hard cover
Order number 2111.7111.02
Spare F adapter, female/female
Order number 1300.7740.02
Matching pad 50/75 Ω, L section, N to BNC
bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W
Order number 1300.5401.00
Soft carrying bag
Order number 0358.5414.02
Matching pad, 75 Ω, L section
bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
Order number 0358.5714.02
Matching pad, 75 Ω, series resistor 25 Ω
0 Hz to 2.7 GHz
Order number 2067.7451.00
Triax connector (mono) with connecting cable (open)
Order number 1301.9530.02
Power sensor support
(requires R&S®FSL-B5 or R&S®NRP-Z4 and R&S®NRP power sensors)
Order number 1419.0006.02
Three-path diode power sensor
For USB operation; Measurement range: 100 pW to 200mW; Frequency range: 10 MHz to 8 GHz; N (m) connector
Order number 1424.6115.02
Thermal power sensor
300 nW to 100 mW, DC to 18 GHz
Order number 1419.0658.02
USB-A interface cable, length: 0.75 m
Order number 1419.0664.02
6-pole interface cable, length: 1.5 m
Related products
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.