Free webinars: Watch our 5G webinars which explain the latest 5G NR physical layer specifications as described in 3GPP Releases15 and 16, discuss the associated test challenges and demonstrate innovative test solutions including 5G signal generation and analysis, massive MIMO and over the air testing.
This webinar focuses on user equipment (UE) power saving techniques introduced by 3GPP Releases 16 and 17 and how to measure the battery lifetime of 5G devices.
This webinar will provide an overview of the RedCap technology, market trends, use cases, related test requirements and challenges while developing RedCap devices. A RedCap device testing solution for R&D, conformance, and carrier acceptance based on the R&S CMX500 radio communication tester, as well as a vendor case study, are demonstrated.
Register now and learn more about the NTN market status, use cases and different strategies, testing aspects and challenges associated with NTN-IoT devices. and how to use the R&S solutions for NTN-IoT device testing in R&D, conformance and production.
This webinar focuses on the challenges and what it takes to design and launch customer-premises equipment (CPE) for FWA
This webinar explains what network slicing is all about, how the RAN can support it, and discusses how to test for correct 5G mobile device behavior.
In this webinar, we will take a closer look at the current status of how non-terrestrial networks are treated in the 3GPP standardization, what the technical challenges are, what the spectrum allocation could look like, and how to leverage the deployment of NTN capable devices and networks.
Wireless communications testing webinars
Learn more about the measurement process for the 5G FR2 antenna systems, the beam steering antenna design principle and cirective antenna radiation pattern assessment.
Join this webinar to learn more about types of 5G devices, markets, use cases, design challenges for the different 5G device markets, common pitfalls of two-way-ranging (TWR) and angle of arrival (AoA) accuracy validation in R&D and production.
Webinar from November 18, 2021
Learn more about upcoming applications and test equipment to ensure the performance of 5G mobile devices featuring high-accuracy positioning.
This webinar presents a novel method using multiple compact antenna test range (CATR) reflectors to perform simultaneous multiple angle measurements for 5G devices that are capable of beamforming in the mmWave frequency range.
Webinar from August 24, 2021
Join and learn about small cells & network densification, test challenges and a one-box solution for 5G FR2 small cell production testing.
Webinar from June 23, 2021
Register for this webinar on 5G mmWave device testing and learn about the test challenges that arise with the design of 5G FR2 mmWave devices.
Webinar from May 25, 2021
Join this webinar to learn about the challenges associated with mobile device testing as well as the benefits of using one unified interface to test across all layers - simplifying signaling tests. This provides you with a holistic view to the design validation test process of a device.
Webinar from March 23, 2021
Learn about technological aspects of over-the-air measurements in the sub-THz region with testing solutions from Rohde & Schwarz.
Webinar from January 27, 2021
Evolution, deployment, technology and testing aspects
Our webinar introduces you to the technology aspects behind incorporating voice services in 5G networks and outlines possible deployment scenarios. Since test and measurement guarantees proper implementation to achieve best user experience, we will also demonstrate how to test voice capabilities of 5G smartphones.
Webinar from November 11, 2020
Many of the 5G applications benefit from having accurate and reliable positioning information; for some, it’s a key enabler. 3GPP identified this need and recently standardized advanced positioning methods in Release 15 and Release 16. In this webinar, we will present the technical requirements and use cases for 5G location based services (LBS). We will then discuss the strengths and limitations of key positioning technologies such as DL-TDOA, MC-RTT, AoD, AoA, GNSS, Wi Fi and Barometric measurements. Finally, we will provide some details around specific Rohde & Schwarz test solutions that can be used to test the reliability and accuracy of positioning methods under all conditions, either indoors or outdoors.
Massive multiple input multiple output (MIMO) antenna systems and beamforming are no doubt the key enablers and fundamental components of 5G deployment. They improve the end-user experience, network capacity and coverage and ultimately contribute to high spectral efficiency. This webinar explains the MIMO techniques used in today’s commercially deployed networks. It further discusses the latest MIMO enhancements specified in 3GPP Release 16, finalized in June 2020. The webinar also demonstrates how to apply Rohde & Schwarz oscilloscopes for testing phase-coherent 5G MIMO signals during the development of 5G base stations and small cells in the lab.
Webinar from June 30, 2020
Watch our new webinar and find out the basics of the wireless Industrial Internet of Things (IIoT) using wireless technologies from Bluetooth to 5G for industrial environments. The webinar also offers information on important challenges of IIoT such as low and deterministic latency, as well as ways to master them. Additionally, it will demonstrate how dedicated measurement solutions can help to understand and optimize key performance characteristics.
Webinar from June 18, 2020
5G is evolving - from an adjunct technology to a solid communications standard that will change how we communicate with each other and the things around us. Although for many it may seem like we just got started, the evolution of 5G has already begun. With exciting new capabilities and features, 5G will open up countless new use cases. Watch this webinar to explore to where 5G is headed, what new technologies will be introduced in 3GPP Releases 16 and 17, and how these new capabilities will affect the overall 5G evolution.
Webinar from January 23, 2020
Over the air (OTA) testing is gaining a lot of momentum in 5G NR, especially when it comes to mmW FR2. For OTA testing, a mobile device or base station under test must be placed in a chamber environment that provides shielding from surrounding signals. Numerous and diverse shielding chambers are available on the market.
This webinar explains the main criteria for making decisions with regard to selecting a shielding chamber and provides guidance on selecting the right OTA test solution for your testing needs, from design and conformance to production testing.
Webinar from December 10, 2019
This webinar will illustrate the basic 5G capability to support ultra-reliable low latency services available with 3GPP Release 15. It also explains the technology components added in 3GPP Release 16 to achieve further improvements.
Analysis and findings are presented from both a leading cellular test solution provider perspective as well as from the view point of a potential adopter of the 5G NR technology in its own factories.
