Brochures and Data Sheets for R&S®ZNB

Outstanding speed, dynamic range and ease of operation

This document provides the technical specifications of the R&S®ZNB vector network analyzer.

This document provides the technical specifications of the R&S®ZNB vector network analyzer (first generation).

VNA remote handling of measurements results using SCPI commands ZNB, ZNA, SCPI Matlab Visa Remote touchstone s2p trace, matlab, VNA The user is requested to move results from a Network Analyzer to the controller PC or to a network drive. VNA remote handling of measurements results using SCPI commands ZNB, ZNA, SCPI Matlab Visa Remote touchstone s2p trace, matlab, VNA The user is requested to move results

Remote Desktop connection ZNC3, ZNB, Remote Desktop connection Remote Desktop connection ZNC3, ZNB, Remote Desktop connection Related Products

Remote Desktop screen size of ZNB/ZND ZNB,ZND, Remote Desktop Remote Desktop screen size of ZNB/ZND Remote Desktop screen size of ZNB/ZND ZNB,ZND, Remote Desktop Remote Desktop screen size of ZNB/ZND Related Products

Remote Desktop Connection does not work on my Analyzer ZNB I want to control my Analyzer using Remote Desktop from my PC. My Analyzer does not react. Remote Desktop Connection does not work on my Analyzer ZNB I want to control my Analyzer using Remote Desktop from my PC. My Analyzer does not react. Related Products

ZNB series Remote Desktop and Hard Keys ZNB, Remote Desktop Is there a way to use the hard keys when using the ZNB via Remote Desktop connection? On my unit I only see the standard menu to the lower left side of the device, but have no access to the "master keyboard" ZNB series Remote Desktop and Hard Keys ZNB, Remote Desktop Is there a way to use the hard keys when using the ZNB via Remote Desktop

Export complex data of a trace with mathematics and time gating ZNA, ZNB, ZND, export complex data Export complex data of a trace with mathematics and time gating. Export complex data of a trace with mathematics and time gating ZNA, ZNB, ZND, export complex data Export complex data of a trace with mathematics and time gating. Related Products

Restore the Auto Logon Configuration FSPx, FSQx, FSUx, ZVBx, ZVAx, ZVTx, ESPIx, ESCI, WINXP, Restore the Auto Logon Configuration Restore the Auto Logon Configuration FSPx, FSQx, FSUx, ZVBx, ZVAx, ZVTx, ESPIx, ESCI, WINXP, Restore the Auto Logon Configuration Related Products

Reverse sweep / backward sweep ZVA, ZVT, ZNB Reverse sweep / backward sweep Reverse sweep / backward sweep ZVA, ZVT, ZNB Reverse sweep / backward sweep Related Products

ZNB: Power off at sweep end possible? ZNB, Power at sweep ZNB: Power off at sweep end possible? ZNB: Power off at sweep end possible? ZNB, Power at sweep ZNB: Power off at sweep end possible? Related Products

File-Transfer from Device to PC via LAN connection (simple way) FSW, FSV3000, FSVA3000, FPL, CMW500, CMX500, ZNA, ZNB, ZNL, ESW, ESR, ESRP I have a file on my device. How can I get it in a simple way to my PC? File-Transfer from Device to PC via LAN connection (simple way) FSW, FSV3000, FSVA3000, FPL, CMW500, CMX500, ZNA, ZNB, ZNL, ESW, ESR, ESRP I have a file on my device. How can I get it in a simple

Can the option ZNB-B10 be installed in the field? FAQ, ZNB, ZNB options, ZNB-B10 Can the option ZNB-B10 be installed in the field? Can the option ZNB-B10 be installed in the field? FAQ, ZNB, ZNB options, ZNB-B10 Can the option ZNB-B10 be installed in the field? Related Products

Usage of a ZNB as two tone signal generator ZNB, FAQW, Usage of a ZNB as two tone signal generator I would like to use the ZNB as a signal generator. I need a CW signal on port 1 and port 3 with different frequencies. How can I get that? Usage of a ZNB as two tone signal generator ZNB, FAQW, Usage of a ZNB as two tone signal generator I would like to use the ZNB as a signal generator. I need a CW signal

Store several diagrams in one file and each diagram on its own page ZNB, ZND, ZNBT, ZNC Store several diagrams in one file and each diagram on its own page Store several diagrams in one file and each diagram on its own page ZNB, ZND, ZNBT, ZNC Store several diagrams in one file and each diagram on its own page Related Products

ZNB Error Message "..calkit does not comply with readable calibration kit file formats" ZNB, TRL calibration kit I have used my TRL calibration kit with my ZVA before. Now I want to use also with my ZNB. But when I try to load the data of the calibration kit into the ZNB, the above error message is shown. ZNB Error Message "..calkit does not comply with readable calibration kit file formats" ZNB, TRL

ZNB – Channel Bits setting with remote commands ZNB, Channel Bits I am using the command “CONT:AUX:C x” to see when a channel is active. But the respective pin at the AUX connector does not switch to “high”. ZNB – Channel Bits setting with remote commands ZNB, Channel Bits I am using the command “CONT:AUX:C x” to see when a channel is active. But the respective pin at the AUX connector does not switch

ZNB - print to file command does not work anymore ZNB, ZND, print to file ZNB - print to file command does not work anymore ZNB - print to file command does not work anymore ZNB, ZND, print to file ZNB - print to file command does not work anymore Related Products

ZNx: Marker read out of other traces with remote commands ZNA, ZNB, ZND, Marker result I have several traces with markers in one channel. When I query the result of marker 1 I always get the response of trace 1. How can I get the result of marker 1 for trace 2? ZNx: Marker read out of other traces with remote commands ZNA, ZNB, ZND, Marker result I have several traces with markers in one channel. When

ZNA, ZNB, ZND - Power off after stop of the Sweep? ZNA, ZNB, ZND - FAQ ZNA, ZNB, ZND - Power off after stop of the Sweep? ZNA, ZNB, ZND - Power off after stop of the Sweep? ZNA, ZNB, ZND - FAQ ZNA, ZNB, ZND - Power off after stop of the Sweep? Related Products

Is the auto cal unit ZV-Z53 with 75 Ohms accepted from ZNB/ZND/ZVA? FAQ, auto cal unit ZV-Z53, ZNB, ZND, ZVA I want to do a calibration with 75 Ohms at the ZNB/ZND/ZVA. Do these VNAs accept the auto cal unit ZV-Z53 with 75 Ohms impedance? Is the auto cal unit ZV-Z53 with 75 Ohms accepted from ZNB/ZND/ZVA? FAQ, auto cal unit ZV-Z53, ZNB, ZND, ZVA I want to do a calibration with 75 Ohms at the ZNB/ZND

Calibrating a vector network analyzer (VNA) with different connectors on each port ZNB; ZVA; ZNC; ZND Calibrating a vector network analyzer (VNA) with different connectors on each port Calibrating a vector network analyzer (VNA) with different connectors on each port ZNB; ZVA; ZNC; ZND Calibrating a vector network analyzer (VNA) with different connectors on each port Related Products

How do I calculate the logarithmic frequency steps for the horizontal axis? Calculate logarithmic frequency, horizontal axis, log frequency steps, FSW, FSV, FSVA, ZNA, ZNB, ZNL, ZND, ZVA, FPL How do I calculate these frequency points when I have a logarithmic sweep and know the center frequency, the span and the number of sweep points? How do I calculate the logarithmic frequency steps for the horizontal

Query of the x-values (frequency) of a trace Query of x-values, (frequency) of a trace, ZVA, ZVB, ZNA, ZNB, ZND I query the values of a trace using scpi commands. But I get the y-values only. Is there a possibility to get the y-values also (frequency)? Query of the x-values (frequency) of a trace Query of x-values, (frequency) of a trace, ZVA, ZVB, ZNA, ZNB, ZND I query the values of a trace using

SCPI remote error message on the display ZNB, ZNC SCPI remote error message on the display SCPI remote error message on the display ZNB, ZNC SCPI remote error message on the display Related Products

Improve the calibration procedure for different setups FAQ: Improve the calibration procedure for different setups Improve the calibration procedure for different setups Improve the calibration procedure for different setups FAQ: Improve the calibration procedure for different setups Improve the calibration procedure for different setups Related Products

Save/recall files: own folder in 'Look In' ZNC; ZNB Save/recall files: own folder in 'Look In' Save/recall files: own folder in 'Look In' ZNC; ZNB Save/recall files: own folder in 'Look In' Related Products

ZNA / ZVA / ZNB - no correction data for Sliding matches? ZNA, ZVA, ZNB, Sliding match I got a calibration kit with a sliding match standard. But there are no correction values for the NWA supplied. ZNA / ZVA / ZNB - no correction data for Sliding matches? ZNA, ZVA, ZNB, Sliding match I got a calibration kit with a sliding match standard. But there are no correction values for the NWA supplied. Related

Manage the preset conditions for ZNB network analyzer remotely ZNB, preset conditions, remotely How do I use the driver correctly? Manage the preset conditions for ZNB network analyzer remotely ZNB, preset conditions, remotely How do I use the driver correctly? Related Products

External generator connected via USB not correctly recognized ZNB, External generator connected via USB not correctly recognized External generator connected via USB not correctly recognized ZNB, External generator connected via USB not correctly recognized Related Products

VNA calibration warning that the active cal kit does not contain all needed standards ZNB, ZNA, VNA, calibration warning, active cal kit Active cal kit or cal unit does not contain all standards needed for selected cal procedure. VNA calibration warning that the active cal kit does not contain all needed standards ZNB, ZNA, VNA, calibration warning, active cal kit Active cal kit or cal unit does not

Apply an offset to a limit line ZNA, ZNB, ZND, offset, timeline I have an existing limit line. Is it possible to apply a vertical offset? Apply an offset to a limit line ZNA, ZNB, ZND, offset, timeline I have an existing limit line. Is it possible to apply a vertical offset? Related Products

ZNB Limit Line display difference on screen and while printing ZNB, ZNB4, ZNB8, ZNB20, ZNB40 What can I do to avoid that difference between my screen and the print? ZNB Limit Line display difference on screen and while printing ZNB, ZNB4, ZNB8, ZNB20, ZNB40 What can I do to avoid that difference between my screen and the print? Related Products

ZNA/ZNB: Export all mixed mode S-Parameters ZNA, ZNB, S-Parameter ZNA/ZNB: Export all mixed mode S-Parameters ZNA/ZNB: Export all mixed mode S-Parameters ZNA, ZNB, S-Parameter ZNA/ZNB: Export all mixed mode S-Parameters Related Products

ZNB - How to disable Sweep Position Display Symbols ZNB, Sweep Position Display Symbols ZNB - How to disable Sweep Position Display Symbols ZNB - How to disable Sweep Position Display Symbols ZNB, Sweep Position Display Symbols ZNB - How to disable Sweep Position Display Symbols Related Products

Calibration of two channels simultaneously with remote commands FAQ, ZVA, ZNA, ZNB, ZND, Multi Channel Calibration Calibration of two channels simultaneously with remote commands Calibration of two channels simultaneously with remote commands FAQ, ZVA, ZNA, ZNB, ZND, Multi Channel Calibration Calibration of two channels simultaneously with remote commands Related Products

ZNB - several channels with external trigger ZNB, trigger ZNB - several channels with external trigger ZNB - several channels with external trigger ZNB, trigger ZNB - several channels with external trigger Related Products

Bias tee limits and calibration considerations ZNB Bias tee limits and calibration considerations Bias tee limits and calibration considerations ZNB Bias tee limits and calibration considerations Related Products

ZNA, ZNB, ZND, ZNL – Export of time domain trace ZNA, ZNB, ZND, ZNL, time domain trace When I export the time domain trace the stimulus values are in Hz, but not in seconds as shown on the screen. How can I get the export in time or distance? ZNA, ZNB, ZND, ZNL – Export of time domain trace ZNA, ZNB, ZND, ZNL, time domain trace When I export the time domain trace the stimulus values are in Hz, but

Query the data of all traces at once ZNA, ZVA, ZNB, ZND, trace data query Is there a way to query the data of all traces at once? Query the data of all traces at once ZNA, ZVA, ZNB, ZND, trace data query Is there a way to query the data of all traces at once? Related Products

ZNA, ZNB, ZNL Execution error “Calibration standard is not used“ ZNA, ZNB, ZNL, I perform a calibration with remote commands. With the command to start the calibration sweep with a short standard I get this error message. What is the problem? ZNA, ZNB, ZNL Execution error “Calibration standard is not used“ ZNA, ZNB, ZNL, I perform a calibration with remote commands. With the command to start the calibration

ZND/ZNB - loading of a s2p file for deembedding with remote commands ZND, ZNB, deebedding, s2p, remote commands I need to activate the deembedding function on a specific port. The data is available on a touchstone file (s2p) How can I load the file with remote commands? ZND/ZNB - loading of a s2p file for deembedding with remote commands ZND, ZNB, deebedding, s2p, remote commands I need to activate

VNA - do I really need a sliding match for calibration? ZNA, ZNB, ZVA, sliding match, VNA, calibration VNA - do I really need a sliding match for calibration? VNA - do I really need a sliding match for calibration? ZNA, ZNB, ZVA, sliding match, VNA, calibration VNA - do I really need a sliding match for calibration? Related Products

ZNB - Calibration Validation always fails ZNB, Calibration Validation I have done a calibration and now I want to validate it with an automatic calibration kit. But it always fails. What is wrong? ZNB - Calibration Validation always fails ZNB, Calibration Validation I have done a calibration and now I want to validate it with an automatic calibration kit. But it always fails. What is wrong? Related

TRL calibration - middle of line or end of line FAQ, ZVA, ZNB, TRL calibration - middle of line or end of line TRL calibration - middle of line or end of line TRL calibration - middle of line or end of line FAQ, ZVA, ZNB, TRL calibration - middle of line or end of line TRL calibration - middle of line or end of line Related Products

Automatically restart with return of the AC power FAQ, ZNA, ZNB, automatically restart, AC power Is it possible to automatically restart a ZNB with return of the AC power? Automatically restart with return of the AC power FAQ, ZNA, ZNB, automatically restart, AC power Is it possible to automatically restart a ZNB with return of the AC power? Related Products

License Keycode for VNAMUC is not accepted ZVA, ZVT, ZVB, ZNB FAQ License Keycode for VNAMUC is not accepted License Keycode for VNAMUC is not accepted ZVA, ZVT, ZVB, ZNB FAQ License Keycode for VNAMUC is not accepted Related Products

ZNB - Warning "Calibration does not cover all traces" ZNB, Calibration, Cal Unit When I start a calibration with an auto cal unit I get the following warning. What does that mean? ZNB - Warning "Calibration does not cover all traces" ZNB, Calibration, Cal Unit When I start a calibration with an auto cal unit I get the following warning. What does that mean? Related Products

ZNA/ZNB/ZND - Export of all Traces of a channel into a CSV file via remote control ZNA, ZNB, ZND, trace export How can I export the traces of a specific channel into one file, i.e. CSV? ZNA/ZNB/ZND - Export of all Traces of a channel into a CSV file via remote control ZNA, ZNB, ZND, trace export How can I export the traces of a specific channel into one file, i.e. CSV? Related Products

ZNB/ZND - wrong connector type shown at Cal Unit Characterization ZNB, ZND, Connector type for Cal unit Characterization ZNB/ZND - wrong connector type shown at Cal Unit Characterization ZNB/ZND - wrong connector type shown at Cal Unit Characterization ZNB, ZND, Connector type for Cal unit Characterization ZNB/ZND - wrong connector type shown at Cal Unit Characterization Related Products

The MINUS key on the keypad does not work ZNB The MINUS key on the keypad does not work. The MINUS key on the keypad does not work ZNB The MINUS key on the keypad does not work. Related Products

Remote control autocalibration with a calibration unit ZNB, ZNBT Remote control autocalibration with a calibration unit Remote control autocalibration with a calibration unit ZNB, ZNBT Remote control autocalibration with a calibration unit Related Products

ASCII export of displayed trace values ZNB ZNB, ASCII export of displayed trace values ASCII export of displayed trace values ZNB ZNB, ASCII export of displayed trace values Related Products

Installing a USB-GPIB adapter ZNB, ZNC, Installing a USB-GPIB adapter Installing a USB-GPIB adapter ZNB, ZNC, Installing a USB-GPIB adapter Related Products

Where history meets tomorrow - Vector Network Analyzer - Flyer Brochures and Data Sheets Flyer

This document provides the technical specifications of the R&S®ZN-ZM292 calibration mixer.

The healthcare sector has adopted many existing and emerging technologies for a wide range of applications. Performance degradation or failure of medical devices and test systems can have severe consequences. As a leader in test and measurement, Rohde & Schwarz partners closely with our customers at every stage of development and deployment. We can help define your testing needs and bring your products to market as quickly as possible – with the required quality and performance. We offer solutions that cover all your medical and health application requirements. Our comprehensive product portfolio has the right test and measurement solutions for your application and budget.

Slide left Slide right

Test and measurement solutions for medical and health applications - Brochure

Test and measurement solutions for medical and health applications - Brochure ZH-CN

This document provides the technical specifications of the R&S®ZN-Z15 RFFE interface.

The Rohde & Schwarz Health Guide for vector network analyzers gives advice to prevent electrical and mechanical damage.

T&M solution guide for network infrastructure equipment providers

Verifying signal integrity in high-speed digital design

This document provides the technical specifications of the R&S®ZN-Z129, R&S®ZN-Z129E, R&S®ZN-Z135 and R&S®ZN-Z170 calibration kits.

English (PD 5214.6516.22)

Measure the dielectric characteristics of various material types

❙ Electronic design

❙ Test and measurement solutions

Slide left Slide right

Efficient analysis of power and signal integrity and EMC - Flyer

Efficient analysis of power and signal integrity and EMC - Flyer ZH

ribbon cable for connecting a DUT to the RFFE GPIO interface

Hybrid load pull and behavioral modeling with R&S®ZNA and R&S®ZVA;
Wideband noise parameter extraction with the R&S®ZNA;
Pulsed IV and compact modeling with the R&S®ZNA and R&S®ZNB