Brochures and Data Sheets for R&S®RTP

R&S®RTP-K101: Compliance test for USB 3.2 Gen 1&2 - Fact Sheet Brochures and Data Sheets

R&S®RTP high-perfomance oscilloscope - Fact sheet Brochures and Data Sheets

R&S®RTP-B High-Performance Oscilloscope - Specifications Brochures and Data Sheets Specifications

The R&S®RTP oscilloscope has an enhanced user interface and a large screen for the outstanding performance and flexibility you expect, combined with a very small footprint. This is perfect for signal integrity analysis in real time.

External frontends (FEs) extend the frequency range of the R&S®RTP high-performance oscilloscope. The basic functionality of an FE is similar to a spectrum analyzer. Depending on the selected radio frequency (RF), an intermediate frequency (IF) is transmitted to the oscilloscope. These frequencies are typically centered roughly at 5 GHz or 10 GHz.

R&S®RTP 오실로스코프는 진보된 사용자 인터페이스와 대형 스크린을 제공하는 고성능 오실로스코프입니다. 초소형 제품 크기와 우수한 성능, 사용자의 필요에 맞춰 활용 가능한 유연성을 동시에 지원합니다. R&S®RTP 오실로스코프는 실시간 신호 무결성을 분석하기 위한 최적의 솔루션입니다.

Get your results faster.

R&S®RT-Zxx High Voltage and Current Probes - Specifications Brochures and Data Sheets Specifications

Oscilloscope innovation. Measurement confidence. - Flyer Brochures and Data Sheets Flyer

RTE/RTO/RTP - Wrong amplitude when digital filter is used RTE, RTO, RTP, amplitude, digital, signal, scale, waveform, vertical, frequency A sinus signal with i.e. 10 V peak-peak, frequency 1 MHz is applied. If I choose a vertical scale which is too small the peaks of the waveform are not displayed as they are out of range. Now I activate the digital filter in the “Vertical” menu à “Channel”. The frequency

RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode? RTE, RTO, RTP, ultra segmentation, blind time I am using the ultra segmentation mode to minimize the blind time. But this is not indicated. Is there a way to calculate it? RTE/RTO/RTP - how can I calculate the blind time in ultra segmentation mode? RTE, RTO, RTP, ultra segmentation, blind time I am using the ultra segmentation

RTO/RTP - Zoom Windows does not show waveform data RTO, RTO6, RTP, Zoom window The Zoom function does not show any waveform data at specific settings, especially at slower timebases in combination with higher sample rates, High resolution and roll mode with more channels. The problem is gone if a lower sample rate is chosen. RTO/RTP - Zoom Windows does not show waveform data RTO, RTO6, RTP, Zoom window

RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands RTE, RTO, RTP, measurement, designated frequency, FFT, remote commands RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands. RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands RTE, RTO, RTP, measurement, designated frequency, FFT

RTE/RTO/RTP - export of the history into one file with remote commands RTE, RTO, RTP, history, export into one file RTE/RTO/RTP - export of the history into one file with remote commands RTE/RTO/RTP - export of the history into one file with remote commands RTE, RTO, RTP, history, export into one file RTE/RTO/RTP - export of the history into one file with remote commands Related Products

RTO / RTP Firmware Update from an older Version RTO, RTP, Firmware update RTO / RTP Firmware Update from an older Version RTO / RTP Firmware Update from an older Version RTO, RTP, Firmware update RTO / RTP Firmware Update from an older Version Related Products

RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5 RTO, RTP, Reference Level definition RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5 RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5 RTO, RTP, Reference Level definition RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5 Related Products

RTE/RTO/RTP - Loading a settings file with Labview drivers FAQ, RTE,RTO,RTP, Loading a settings file with Labview drivers RTE/RTO/RTP - Loading a settings file with Labview drivers RTE/RTO/RTP - Loading a settings file with Labview drivers FAQ, RTE,RTO,RTP, Loading a settings file with Labview drivers RTE/RTO/RTP - Loading a settings file with Labview drivers Related Products

Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? Which test fixture for MDI mode conversion measurement at 100Base T1 Compliance Test? MDI mode, conversion, 100Base T1, compliance test, RTO, RTP, Scope Suite

Programming examples for oscilloscopes Programming examples, oscilloscopes, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO, RTO1000, RTO2000, RTO6, RTP Programming examples for oscilloscopes. Programming examples for oscilloscopes Programming examples, oscilloscopes, RTH, RTC, RTC1000, RTB, RTB2000, RTM, RTM3000, RTA, RTA4000, RTE, RTE1000, RTO, RTO1000, RTO2000, RTO6

RTO/RTP-K11 I/Q software interface - sample script for configuration and data query RTO, RTP-K11, I/Q software interface, sample script, configuration, data query The SCPI sequence for configuration and data query for the I/Q software interface option K11. RTO/RTP-K11 I/Q software interface - sample script for configuration and data query RTO, RTP-K11, I/Q software interface, sample script, configuration

RTO/RTP further calculation of a measurement RTO, RTP, math, operations, measurement, frequency, cycles Is it possible to do math operations on a measurement? For example measure the frequency but display the result as cycles per minute? RTO/RTP further calculation of a measurement RTO, RTP, math, operations, measurement, frequency, cycles Is it possible to do math operations on a measurement? For

Connection of DUT and Link partner with test fixture RT-ZF2 RTO, RTP, RT-ZF2 Connection of DUT and Link partner with test fixture RT-ZF2 Connection of DUT and Link partner with test fixture RT-ZF2 RTO, RTP, RT-ZF2 Connection of DUT and Link partner with test fixture RT-ZF2 Related Products

Volume Adjustment of the "BEEP" FAQ, RTO, RTE, RTP Volume Adjustment of the "BEEP" Volume Adjustment of the "BEEP" FAQ, RTO, RTE, RTP Volume Adjustment of the "BEEP" Related Products

Decoding of SENT protocoll shows CRC errors Decoding, SENT protocoll, CRC errors, RTO, RTE, RTP FAQ - Decoding of SENT protocoll shows CRC errors Decoding of SENT protocoll shows CRC errors Decoding, SENT protocoll, CRC errors, RTO, RTE, RTP FAQ - Decoding of SENT protocoll shows CRC errors Related Products

RTE/RTO/RTP - Zoom shows ringing effects RTE, RTO, RTP, Zoom When I use the zoom function to look at the rising edge of a rectangle signal, I see ringing which is not real, see screenshot. What is the reason? RTE/RTO/RTP - Zoom shows ringing effects RTE, RTO, RTP, Zoom When I use the zoom function to look at the rising edge of a rectangle signal, I see ringing which is not real, see screenshot. What

RTE/RTO/RTP Autologon recovery RTE, RTO, RTP, Autologon At startup of RTE/RTO/RTP Windows asks for user and password. How can I get back the autologon function? RTE/RTO/RTP Autologon recovery RTE, RTO, RTP, Autologon At startup of RTE/RTO/RTP Windows asks for user and password. How can I get back the autologon function? Related Products

Waveform export to csv files shows wrong values in Excel RTO, RTE, RTP, RTM, RTB, RTC, RTA I have exported the waveform into a csv file. When I open the file in Excel, the values are completely wrong. How can I get correct values? Waveform export to csv files shows wrong values in Excel RTO, RTE, RTP, RTM, RTB, RTC, RTA I have exported the waveform into a csv file. When I open the file in Excel, the

R&S Scope Suite - eMMC compliance test fails Scope Suite, eMMC compliance test fails, RTO, RTP R&S Scope Suite - eMMC compliance test fails R&S Scope Suite - eMMC compliance test fails Scope Suite, eMMC compliance test fails, RTO, RTP R&S Scope Suite - eMMC compliance test fails Related Products

Scaling of frequency measurements RTE, RTO, RTP in cycles/min FAQ, RTO, RTE, RTP, Scaling of frequency measurements Scaling of frequency measurements RTE, RTO, RTP in cycles/min Scaling of frequency measurements RTE, RTO, RTP in cycles/min FAQ, RTO, RTE, RTP, Scaling of frequency measurements Scaling of frequency measurements RTE, RTO, RTP in cycles/min Related Products

RTO2000 / RTP - Touch function is lost with external Monitor RTO2000 / RTP - Touch function is lost with external Monitor When an additional monitor is connected via the HDMI interface, the touch functionality is lost. How can I get the touch functionality back? RTO2000 / RTP - Touch function is lost with external Monitor RTO2000 / RTP - Touch function is lost with external Monitor When an additional

RT-ZSxx – more noise with active probes? Probes, reduce noise, RTM, RTA, RTE, RTO, RTP, RT-ZSxx I have compared passive and active probes. It seems that the noise with active probes is higher. What is the reason and what can I do to reduce the noise? RT-ZSxx – more noise with active probes? Probes, reduce noise, RTM, RTA, RTE, RTO, RTP, RT-ZSxx I have compared passive and active probes. It seems that

Scope Suite Software: Can Ethernet compliance tests be done also with VNAs not from R&S RTO, RTP, Scope Suite Software For some tests a vector network analyzer is required. The Scope Suite software just supports VNAs from R&S to be connected via LAN for automated measurements. Can I use also other VNAs and do the measurement manually? Scope Suite Software: Can Ethernet compliance tests be done also

Offset changes RMS measurement Offset, changes RMS, measurement, RTE, RTO, RTP When I do RMS measurements and an offset is applied, the result changes. I could not see that effect on other scopes. What is wrong here? Offset changes RMS measurement Offset, changes RMS, measurement, RTE, RTO, RTP When I do RMS measurements and an offset is applied, the result changes. I could not see that effect on other

Selecting your next oscilloscope: Why fast update rate matters | 选择下一代示波器: 为什么更高的波形捕获率很重要 - White Paper Brochures and Data Sheets White Paper

Excellence in precision. Solutions for particle accelerators | 卓越した精度：粒子加速器 用のソリューション - Flyer Brochures and Data Sheets Flyer

This guide covers the most important aspects of selecting an oscilloscope and provides you with the knowledge to make the best choice for your needs.

Testing the world’s first quantum error correction stack

Excellence in precision. Solutions for particle accelerators - Flyer Brochures and Data Sheets Flyer

Oscilloscope innovation. Measurement confidence. | オシロスコープの革新、測定の核心に迫る。 - Flyer Brochures and Data Sheets Flyer

Oscilloscope innovation. Measurement confidence. - Flyer Brochures and Data Sheets Flyer

Oscilloscope innovation. Measurement confidence. | Инновационные осциллографы. Достоверные результаты измерений. - Flyer Brochures and Data Sheets Flyer

The healthcare sector has adopted many existing and emerging technologies for a wide range of applications. Performance degradation or failure of medical devices and test systems can have severe consequences. As a leader in test and measurement, Rohde & Schwarz partners closely with our customers at every stage of development and deployment. We can help define your testing needs and bring your products to market as quickly as possible – with the required quality and performance. We offer solutions that cover all your medical and health application requirements. Our comprehensive product portfolio has the right test and measurement solutions for your application and budget.

Slide left Slide right

Test and measurement solutions for medical and health applications - Brochure

Test and measurement solutions for medical and health applications - Brochure ZH-CN

Test solutions for safety and security in the new aviation era

The growth in high speed communications technologies has increased demand for compliance and compatibility testing in line with an ever increasing number of industry standards. Rohde & Schwarz is partnering with Eurofins Digital Testing to provide access to the latest high speed signal analysis and compliance testing tools with the R&S®RTP164 high-performance oscilloscope. Eurofins Digital Testing also has plans to provide certification services for high speed communications technologies such as USB.

This document provides: - A description of how oscilloscope acquisition memory is defined - Insight into the relationship between memory and other oscilloscope parameters - Examples where deep memory provides value

Brochures and Data Sheets Product brochure

Slide left Slide right

KO

ZH-CN

Automotive radars on the test bench

Slide left Slide right

Analyzing automotive radar signals with an oscilloscope - eGuide - Miscellaneous

Analyzing automotive radar signals with an oscilloscope - eGuide - Miscellaneous DE

Analyzing automotive radar signals with an oscilloscope - eGuide - Miscellaneous JA

Oscilloscope adapters for R&S®RTM3000, R&S®RTA4000, R&S®MXO 4, R&S®RTE, R&S®RTO6, R&S®RTP oscilloscopes

Rohde & Schwarz gives you the benefit of a well-coordinated portfolio of conducted and OTA test solutions.

Active electronically scanned array and antenna testing

Discover the new R&S®RTP oscilloscope

T&M solution guide for network infrastructure equipment providers

This document provides: - An explanation of update rate - How users can quickly perform their own update rate characterization - How to compare vendor update rates - Benefits of fast update rate

Standard probes for R&S®RTC1000, R&S®RTB2000, R&S®RTM3000, R&S®MXO 4, R&S®RTE, R&S®RTO, R&S®RTP, R&S®RTH oscilloscopes

Your new R&S®RTP-B oscilloscope sent to you inside 7 days*

Addressing high-speed probing challenges with the R&S®RT-ZM modular probe system

Slide left Slide right

R&S®RT-ZM Modular Probe System - Flyer

R&S®RT-ZM Modular Probe System - Flyer JA

R&S®RT-ZM Modular Probe System - Flyer KO

R&S®RT-ZM Modular Probe System - Flyer RU

R&S®RT-ZM Modular Probe System - Flyer ZH-CN

High bandwidth probes for R&S®RTM3000, R&S®RTA4000, R&S®MXO 4, R&S®RTE, R&S®RTO6, R&S®RTP oscilloscopes

Automotive test solution

本指南将介绍以下内容：- 示波器采集存储的定义 - 存储和其他示波器参数的关系 - 深存储的作用示例

Get a free bandwidth upgrade for the R&S®RTO2000 or the R&S®RTP

We propose a joint jitter and noise analysis framework for serial PAM transmission based on a parametric signal model. Our approach has several benefits over state-of-the-art methods. First, we provide additional measurements. Second, we require shorter signal lengths for the same accuracy. Finally, our method does not rely on specific symbol sequences. In this paper, we show example measurement results as well as comparisons with state-of-the-art methods.

This document provides the technical specifications of the VSE-K144 / -K146 / -K148 / -K171 / -K175 / FSx-K144 / -K145 / -K147 / -K148 / -K171 / -K175 / FPS-K144 / -K148 5G NR measurement application

Choosing the right instrument for your application

Instrument Health Guide For benchtop oscilloscopes - Brochure Brochures and Data Sheets Brochure

本白皮书包含以下内容：- 模拟和数字触发架构 - 数字触发示波器的优势 - 如何辨别数字或模拟触发示波器

This document provides: - An explanation of analog versus digital triggering architectures - User advantages for oscilloscopes that have digital triggering - How to determine if an oscilloscope has a digital or analog trigger

Test fixture sets made by Rohde & Schwarz
The different interface standards define the connection between the measuring equipment and the device under test. Rohde & Schwarz offers the required test fixture sets.